Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Fantec MR-35DRN
Summary of Contents for Fantec MR-35DRN
- Page 1 FANTEC MR-35DRN USER MANUAL...
-
Page 2: Table Of Contents
General Description The FANTEC MR-35DRN is a fully functional gigabit NAS (Network Attached Storage) with dual SATA interface. It provides superior performance and functionality for Router Gateway, NAS, IP Set Top Box, VoIP and other SME (Small and Medium Enterprise) and SOHO (Small Office / Home Office) applications. -
Page 3: First Commissioning
The MR-35DRN start-up will take about 3 minutes, during the boot procedure the Ready LED is blinking; after the start-up is complete, the Ready LED will flash permanent. Then you can access the MR-35DRN through the GUI. (Graphic User Interface) The Hard Disk Installation:Sway from side to side the lock doorknob to insert 1 or 2 hard disk.Close the doorknob and the installation will be... - Page 4 Then you can change the MR-35DRN Name and IP address. Note: Please don’t forget your IP address, otherwise you may loose all information and are not able to access the MR-35DRN’s GUI !!! Press the “Next” button and you can set the Date and Time.
-
Page 5: Administration Of The Mr-35Drn
2.2 Administration of the MR-35DRN The following methods allows administrators to access the configuration pages. Launch your web browser if you know the IP address of the MR-35DRN. Enter the correct IP address in the browser. (in this example “http://192.168.10.110”) Note: The MR-35DRN default IP is : 192.168.3.1... -
Page 6: User And Group Management
In Group Management menu, it shows all existing groups in the system. A new the MR-35DRN group is created by filling out the form and click “Save” button. Select the existing is in progress. -
Page 7: File And Print Settings
“Information”, “Disk Usage”, and “Error Notification”. 2.7.1 LAN Settings Hostname You must assign a unique name for each MR-35DRN as the identification within your local area network. The default hostname is “fantec”. IP address setting You must assign a unique IP address for each MR-35DRN as the identification... - Page 8 DNS server address automatically. The system gets DNS server addresses from DHCP server if available Use PPPOE Obtain the IP addresses The MR-35DRN provides superior performance and functionality for Router Gateway. You can get the User Name and password from your Telecommunications providers.
-
Page 9: Network Service
2.8 Network Service 2.8.1 DHCP Server The DHCP service allows your PC to get an IP address from the MR-35DRN. If your PC can not get an IP address from the NAS, you should set your PC IP address to a static IP address. -
Page 10: Maintenance
Specify your disk spin down time if no access to the hard disks. 2.9.2 RAID Setting The MR-35DRN supports RAID mode 0, 1 and Linear. You only have to plug in 2 hard disks and the RAID function can be used. To create the RAID system please format the hard disks and select EXT2 or EXT3 file system and RAID 0, 1 or Linear RAID mode. -
Page 11: Log File
The MR-35DRN is creating the selected RAID system and after creation has finished, it will format the disk in selected file system automaticly. After reboot you have to re-enter the IP address and hostname settings by the usage of “SetupUtil.exe”. -
Page 12: Account
Hard drive data segments are written to different disks simultaneously which increases performance while sacrificing data redundancy. To implement the FAST storage policy, the MR-35DRN creates a single virtual volume that is striped across both hard drives, with a storage capacity that is equal to the sum of both hard disk drives.
Need help?
Do you have a question about the MR-35DRN and is the answer not in the manual?
Questions and answers