Advertisement
SCE-3PTL 3-Point Latch kit
Quarter turn assembly view
Item
Qty
1
2
Rod Guide, 1/4 Turn Mtg. Guide For 0.25 x 0.63 Door Rod, Steel, Zinc
2
2
Bolt, Hex Head, Serrated Flange, 1/4-20 x 3/8", Steel, Zinc Clear Plated
3
1
Door Center Adapter with Stop, 0.79 x 0.25, Zinc Die Cast
4
1
Cam, 3 Point, Dual, Small Door Center with BSO's, Steel, Zinc Clear
5
2
Door Rod Assembly, 37.00 in. Precut Rod, 39.33 in. Assembled
INSTALLATION INSTRUCTIONS:
A. Cut and assemble door rod assembly by following instructions on page 2.
B. Remove the mounting nuts from the quarter turn latches.
C. Insert door rod (5) through the rod guide (1).
D. Insert the rod guide onto quarter turn latch and resecure mounting nut.
See quarter turn assembly view
E. Complete door rod assembly by installing ramp shoe (7), adapter (8) and
set screws (6).
F. Install center door handle or latch and install the 3-point cam (4).
G. Install the door rod adapters onto cam and tighten hex head bolts (2).
4
Bill of material SCE-3PTL
1
5
3
1
2
Part I.D.
102253
112504
116470
128142
128208
spec-3pt-latch-kit-instman
Advertisement
Table of Contents
Related Manuals for SCE SCE-3PTL
Summary of Contents for SCE SCE-3PTL
- Page 1 SCE-3PTL 3-Point Latch kit Quarter turn assembly view Item Bill of material SCE-3PTL Part I.D. Rod Guide, 1/4 Turn Mtg. Guide For 0.25 x 0.63 Door Rod, Steel, Zinc 102253 Bolt, Hex Head, Serrated Flange, 1/4-20 x 3/8”, Steel, Zinc Clear Plated 112504 Door Center Adapter with Stop, 0.79 x 0.25, Zinc Die Cast...
- Page 2 Door rod assembly length SCE-ELKL SCE-ELPL SCE-PH5 SCE-PCH5 Along with any quarter turn latch, the SCE-PCH5-7SC following handles may be used with SCE-PKH5 SCE-PH7 SCE-3PTL hardware. SCE-PCH7 Handle to be ordered separately. SCE-PCH7-7SC SCE-PKH7 SCE-PCH5SS SCE-PH5SS PCE-PKH5SS spec-3pt-latch-kit-instman...
Need help?
Do you have a question about the SCE-3PTL and is the answer not in the manual?
Questions and answers