Fanimation SF120 Instruction Sheet

SF120 Semi-Flush Light Fixture Instructions Sheet
Electrical Requirements
Your new light fixture will require a grounded
electrical supply line of 120 volts AC, 60 Hz, 15
amp circuit.
CAUTION
Do not install or use fixture if any part is damaged or
missing. This product is designed to use only those
parts supplied with this product and/or any accessories
designated specifically for use with this product by
Fanimation. Substitution of parts or accessories not
designated for use with this product by Fanimation
could result in personal injury or property damage.
Contact your retail store for missing or damaged parts.

Parts List

Item # Description
1 Semi-Flush Fixture
2 Hardware Parts, contains
Crossbar w/ Gnd Screw
Screw, junction box
Rod, Threaded
Rubber Washer
Hex Nut
Knurled Nut
Lockwasher
Bowl Cap
Finial Nut
Wire Connector
How To Order Parts
When ordering repair parts, always
give the following information:
• Part Number
• Part Description
• Fan Model Number
Contact your retail store for repair parts.
Maintainance Requirements
Periodic light dusting of the light fixture and glass is
recommended. A feather duster will work best. Avoid
using water, cleansers, or harsh rags, which can ruin
the finish and fixture.
Qty. Part #
1 SF120
1 HDWSF120
1
2
2
1
1
2
2
1
1
2
1. Before discarding packing materials, be certain all parts
have been removed.
2
NOTE: The illustration shown is not to scale or its actual
configuration may vary
SF120PW with
G454 (sold seperately)
1