Fanimation HP120 Instruction Sheet

HP120 Hanging Pendant Light Fixture Instructions Sheet

Electrical Requirements

Your new light fixture will require a grounded
electrical supply line of 120 volts AC, 60 Hz, 15
amp circuit.
CAUTION
Do not install or use fixture if any part is damaged or
missing. This product is designed to use only those
parts supplied with this product and/or any accessories
designated specifically for use with this product by
Fanimation. Substitution of parts or accessories not
designated for use with this product by Fanimation
could result in personal injury or property damage.
Contact your retail store for missing or damaged parts.

Parts List

Item # Description
1 Light Fixture
Support, 1-foot section
Base, Support
2 Hardware Parts, contains
Crossbar w/ Gnd Screw
Screw, junction box
Rod, Threaded
Hex Nut
Knurled Nut
Lockwasher
Wire Connector

How To Order Parts

When ordering repair parts, always
give the following information:
• Part Number
• Part Description
• Fan Model Number
Contact your retail store for repair parts.

Maintainance Requirements

Periodic light dusting of the light fi xture and glass is
recommended. A feather duster will work best. Avoid
using water, cleansers, or harsh rags, which can ruin
the fi nish and fi xture.
Qty. Part #
1 HP120
3
1
1 HDWSF120
1
2
2
1
2
2
2
1. Before discarding packing materials, be certain all parts
have been removed.
2
NOTE: The illustration shown is not to scale or its actual
confi guration may vary
HP120AB with
G239 (sold seperately)
1