Vantage Hearth Equinox 73 EQ73TB-TI Installation page 3

Widgets Overview
For detailed information about all widgets and other profile and settings screens, click on file link below to load Widget Instructions:
LINK: Equinox Widgets_install.pdf
©Vantage, 41739 / IS-0542-A / InFusion
7. Scroll down to the next device screen for:

device information –

ip address: xxx.xxx.xxx.xxx

serial number: xxxxxxx

app version – xx.xx.xx (used in diagnostics)

kernel version – version and date (used in diagnostics)

rootfs version – xx.xx.xx (used in diagnostics)

up time: x day(s) x:xx

controller information –

controller ip – xxx.xxx.xxx.xxx

controller firmware: x.x.x.x
8. Scroll down to the bottom of device screen:

network settings – select dhcp or static*, see below if static is selected.

reset user settings – clears the current IP information when the device
is restarted through power cycle or reboot method. (use reconnect
after using the reset button)

reload: opens screen to select reload or cancel reload, If reload is
selected the station reboots and reeds information from the
controller. If cancel is selected the screen returns to the device
settings screen.
*static:

ip address – xxx.xxx.xxx.xxx

netmask – xxx.xxx.xxx.xxx

default gateway – xxx.xxx.xxx.xxx

dns server – xxx.xxx.xxx.xxx
Equinox 73 LCD Touchscreen – MODEL: EQ73TB-TI
I N S T A L L A T I O N
page 3 of 4