Advertisement
Quick Links
MP2005A Amplifier Volume Controller
S
pecification
Model
Rated output
Output sensitivity
Frequency response
Harmonic distortion
Signal to noise
Protection
Power supply
Power consumption
Size of panel (L× W× H)
Installation size of base box (L× W× H)
Net weight
F
eatures
➢ Remote Amplifier Volume Controller
➢ Rated output 5W/4Ω (distortion 10%)
➢ Output sensitivity: 10kΩ, 300mV (±10%), unbalanced
➢ Provided with power switch, capable of independent
control of volume
10kΩ, 300mV (±10%), unbalanced
<1% (1kHz, 1/3 rated output voltage)
AC fuse, short circuit protection
MP2005A
5W/4Ω (distortion 10%)
80Hz-18kHz (± 3dB)
> 70dB
AC220-240V/50Hz
8W
86× 86× 68mm
78× 78× 50mm
0.2kg
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for DSPPA MP2005A
Summary of Contents for DSPPA MP2005A
- Page 1 MP2005A Amplifier Volume Controller eatures ➢ Remote Amplifier Volume Controller ➢ Rated output 5W/4Ω (distortion 10%) ➢ Output sensitivity: 10kΩ, 300mV (±10%), unbalanced ➢ Provided with power switch, capable of independent control of volume pecification Model MP2005A 5W/4Ω (distortion 10%) Rated output 10kΩ, 300mV (±10%), unbalanced...
- Page 2 How to install: Connect the signal input line with the sound source (white represents hot signal end), connect the power output line with the speaker (red +, black -), and connect power line with AC 220V power supply in a safe manner (see figure below); Warning: It is prohibited to connect AC220V power supply to signal input line or power output line! Signal input line (hot...
Need help?
Do you have a question about the MP2005A and is the answer not in the manual?
Questions and answers