Discovery Of A Lutron Radiora 2 On The Mms - Lutron Electronics AUTONOMIC MIRAGE Radio Ra 2 Programming Manual

3.0 Discovery of a Lutron
RadioRA 2 on the MMS:
• Navigate to the Mirage media Server's config page
• Select the Source Settings* tab from the config page
• Scroll down the page to the Lutron Configuration section
• Select the dropdown under the Lutron RadioRA 2 system, then select the name
of your project. The drop down box will automatically be populated with the
name of your RadioRA 2 system. (If you do not see your configuration in the
dropdown then select other, and enter the IP address of the RadioRA 2 processor)
*In version 5.3, 5.4 and above Control Systems tab
MirageAudioSystem.com
http://<IP of MMS>/config
Autonomic Programming Guide | 5 of 9