Advertisement
Quick Links
Advertisement
Related Manuals for STILFORD JBPROFM2BK
Summary of Contents for STILFORD JBPROFM2BK
- Page 1 ASSEMBLY INSTRUCTIONS PROFESSIONAL 2 ERGONOMIC EXTRA HEAVY DUTY CHAIR JBPROFM2BK Weight capacity: 160kgs This design and instruction booklet is subject to copyright. www.officeworks.com.au 1CTN For spare parts or hardware call (03) 9310 3011 or email hardware@kyvas.com.au 1/10...
-
Page 2: Tools Required
Assembly Video • To view an assembly video, go to https://www.officeworks.com.au • Search the product by item code or name: • Click on the icon to watch the video. (03) 9310 3011 Tools Required CAUTION: Do not use tools other than those required, as this can damage your new item. Please ensure drill is set to torque 5Nm. - Page 3 FRONT (5/16" x 3/4") (1/4" x 1-1/4") 3/10...
- Page 4 Note: Push the castors (F) firmly into hole at the end of each leg. Note: Turn over the Star Base (E) and insert Gas Lift (D) into the centre hole of Star Base (E). 4/10...
- Page 5 Torque 5 Nm 6 Pcs 1/4" x 1-1/4" Bolt used to complete this step. Only applicable for when using a drill. Set torque to 5Nm Do not tighten Screws fully until you have completed assembly. Note: Place assembled seat on the Gas Lift (D). Push down firmly until connection is secure. 5/10...
- Page 6 Remark: For assembly the J-bar needs to be extended as shown in the diagram. Note: Extend the J-bar by holding the backrest with one hand and pull the bottom of J-bar with other hand. 3 Pcs 5/16" x 3/4" Bolt used to complete this step.
-
Page 7: Care Instructions
Your Professional 2 Ergonomic Extra Heavy Duty Chair is now complete and ready for use. IMPORTANT NOTE: Periodically check and re-tighten screws Care Instructions • Vacuum regularly. • To maintain the appearance of non-upholstered parts, wipe the surface with a clean cloth dampened with a mild soap solution. -
Page 8: Setting Up Your Workstation
SETTING UP YOUR WORKSTATION WRONG SITTING POSTURE Neck Shoulders Low Back Wrists CORRECT SITTING POSTURE COMPUTER WORKSTATION ERGONOMICS 45-70cm MONITOR Adjust distance and height: top of the monitor at eye-level and slightly tilted. TAKE ARMS BREAKS Relax shoulders. Forearms parallel to the floor. EVERY 25 Minimal bend at the wrist. - Page 9 HOW TO USE YOUR CHAIR The func�ons described below will help you to achieve op�mal work posture and comfort. Seat Tilt Si�ng in the chair adjust the seat angle so that the seat is horizontal or inclined slightly forward. This is to achieve an angle greater than 90°...
- Page 10 Warranty 15 years Product Warranty – valid for Australian customers only Officeworks Ltd warrants that this product will be free from defects and work as intended for 15 years from the date of purchase by the original customer. If the product has any defects or does not work as intended during the Warranty Period, Officeworks will, at its election and at its expense, repair or replace the product.
Need help?
Do you have a question about the JBPROFM2BK and is the answer not in the manual?
Questions and answers