Page 1
Use, duplication, or disclosure is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software Restricted Rights clause at DFARS 252.227-7013 and/or the Commercial Computer Software Restricted Rights clause at FAR 52.227-19(c) (1) and (2). Optica Technologies Incorporated, 2051 Dogwood Street , Louisville, CO 80027 USA.
All interface cables to this equipment, except for fibre optic cables, must be shielded and designed in accordance with proper EMI techniques to ensure compliance with EMC requirements. OPTICA TECHNOLOGIES INCORPORATED will provide cable shielding specifications on request. Electromagnetic Emissions Statements...
Therefore, consideration should be given when installing the equipment in a rack. Maximum ambient temperature of Optica Technologies Incorporated equipment is +40º C. 2. Reduced Airflow - Installation of the equipment in a rack should be such that the amount of airflow required for safe operation of the equipment is not compromised.
ESCON/Bus &Tag environment. If you are new to this technology, you should read all the instructions in the 34600 User Guide to ensure proper setup and operation of the 34600 FXBT Converter. The 34600 User Guide is available for download from our website, www.OpticaTech.com.
Page 5
Configurations The 34600 FXBT Converter is connected directly to a native CNC channel via a fiber optic MTRJ-to-MTRJ (or duplex-to-MTRJ) cable. The bus and tag devices are then connected to a bus and tag "Y" cable that is connected to the FXBT converter.
All manuals and user guides at all-guides.com Connecting to the Bus and Tag Devices The FXBT Bus and Tag port requires a Y connection cable (Optica Technologies P/N 149510, IBM P/N 6473053) to attach it to the legacy Bus and Tag devices. To attach the FXBT to the devices, follow the following steps: 1.
CU ACTIVE: (GREEN) The converter is actively communicating with a bus/tag device (OP IN). Character Window: NORMAL OPERATIONS: Scrolls the Optica microcode version and the current TCP/IP address of the FXBT. POWERING UP: Various numbers and characters indicating what stage the power-on diagnostics and self tests are in.
All manuals and user guides at all-guides.com from the date of shipment. All products that are replaced will become the property of OTI. OTI shall have no obligation to repair or replace a product until the customer has requested a Return Authorization Number and returns the defective product to OTI.
Page 9
All manuals and user guides at all-guides.com product Serial Number (found on the label on the underside of the unit), as well as the business name and location of the equipment, telephone and facsimile number, e-mail address for a contact individual, and a brief description of the fault condition.
Page 10
All manuals and user guides at all-guides.com Notes...
Page 11
All manuals and user guides at all-guides.com Optica Technologies Incorporated 2051 Dogwood Street Louisville, CO 80027 www.opticatech.com...