Table of Contents
Advertisement
3.2. Disposal
Dispose of TAB LiFePO4 battery in accordance with local, state and federal laws
and regulations.
Batteries may be returned to the sellers or TAB d.d.
Do not mix with other (industrial) waste.
4. Installation
4.1. General Information
Warning! Never install or use a damaged LiFePO4 battery.
Caution! Do not reverse connect the power cables (polarity).
When connecting several batteries in parallel, always use batteries of the same
brand, type, age, capacity and state of charge.
4.2. Unpacking
Check TAB LiFePO4 battery for damage after unpacking. If TAB LiFePO4 battery is
damaged, contact your reseller or TAB d.d.. Do not install or use TAB LiFePO4 battery
if it is damaged!
4.3. Preparing the Battery for Use
Warning! Always remain within the limits indicated in chapter 2 during the use of
TAB LiFePO4 battery.
Caution! In case of an empty LiFePO4 battery shutdown, charge immediately.
4.3.1. Location of the LiFePO4 battery
Before it is used, the battery must be positioned in such a way that it will not move
around in its compartment during use.
Use appropriate LN5 (DIN88) or alternative metal fastening brackets for mounting.
Note: battery holddown mounting brackets are not provided with TAB LiFePO4
battery.
4.4. Connection Cables (+ and -)
Use appropriate wire for the connection wires to ensure no overheating or
unnecessary losses occur. Use appropriate fuses matching the wires and load.
11
Advertisement
Table of Contents
