Related Manuals for Tab LiFePO4
Summary of Contents for Tab LiFePO4
- Page 1 USER MANUAL TAB LI-ION BATTERIES Lithium Iron Phosphate Batteries 6.4V • 12.8V • 25.6V www.tab.si...
- Page 3 Lithium batteries as described above, will be referred to as: Sealed Lead Acid Replacement Batteries. This manual is meant for the installer and the user of the LiFePO4 batteries. Only qualified, certified personnel may install and perform maintenance on the Sealed Lead Acid Replacement Batteries.
-
Page 4: Table Of Contents
4.3. Preparing the Battery for Use 4.3.1. Location of the LiFePO4 battery 4.4. Connection Cables (+ and -) 4.5. Connecting a Charger to the LiFePO4 Battery 4.6. Connecting Batteries in Parallel to a Charger Device 4.7. DC Load Connected - Discharge Protection 4.8. -
Page 5: Introduction
1. Introduction 1.1. Product Description TAB’s Sealed Lead Acid Replacement Batteries are Lithium Iron Phosphate rechargeable batteries. Lithium Iron Phosphate (LiFePO4) technology is considered as the latest and safest lithium technology available in the market. Potential applications of this TAB LiFePO4 battery include: recreational vehicles/Caravans, boats, mobile homes, industrial energy storage solutions. - Page 6 -20°C to +60°C Temperature Range (Storage) 0°C to +40°C 0°C to +40°C 0°C to +40°C Water Dust Resistance IP56 IP56 IP56 Cell Configuration Cell Size 18650/26650 18650/26650 18650/26650 Cell Chemistry LiFePO4, Lithium Iron Phosphate Battery Battery Housing ABS Plastic, UL V0-94...
-
Page 7: Product List
2.2. Product List E.Leisure clever E.Leisure premium TAB E.LEISURE CLEVER Dimensions (mm) Weight Code Terminal HD 12-7,5 C 12,8 HD 12-10 C 12,8 HD 12-12 C 12,8 153,6 HD 12-20 C 12,8 HD 12-33 C 12,8 422,4 HD 12-40 C... - Page 8 TAB E.LEISURE PREMIUM Dimensions (mm) Weight Code Terminal HD 6.4-4.5 P 28,8 HD 6.4-7.5 P HD 6.4-10 P HD 12-4,5 P 12,8 57,6 HD 12-6.0 P 12,8 76,8 HD 12-7,5 P 12,8 HD 12-10 P 12,8 HD 12-12 P 12,8...
-
Page 9: Environmental Conditions
Exposing the LifePO4 battery to conditions beyond the specified bound varies may lead to serious damage to the product and/or the user. Use the LiFePO4 battery in a dry, clean, dust free, well ventilated space. Do not expose the LiFePO4 battery to fire or water or solvents. -
Page 10: Operation Modes
• Do not remove TAB LiFePO4 battery from its original packaging until required for use. • In the event of TAB LiFePO4 battery leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. -
Page 11: Disposal
4.2. Unpacking Check TAB LiFePO4 battery for damage after unpacking. If TAB LiFePO4 battery is damaged, contact your reseller or TAB d.d.. Do not install or use TAB LiFePO4 battery if it is damaged! 4.3. Preparing the Battery for Use Warning! Always remain within the limits indicated in chapter 2 during the use of TAB LiFePO4 battery. -
Page 12: Connecting A Charger To The Lifepo4 Battery
4.5. Connecting a Charger to the LiFePO4 Battery Warning! Ensure you have completed all the previous steps described in chapter 4 before connecting the battery to the charger. Battery charger Plus (+) Load Minus (-) Figure 1. Connecting a charger to the battery 4.6. -
Page 13: Dc Load Connected - Discharge Protection
Batteries closest to load will have the highest contribution to the current into the load. Whereas batteries further away from load will have lesser current contribution. Wear and tear will be higher on TAB LiFePO4 battery close to the load. 4.7. DC Load Connected - Discharge Protection TAB LiFePO4 batteries are as standard equipped with a DC switch-off device which is integrated inside the battery, which is activated at 80% discharge. -
Page 14: Battery Use
1. Connect the charger to the battery as described in paragraph 4.6. 2. Charge TAB LiFePO4 battery in case of an empty shutdown or if the state of charge drops below 20% to preserve the lifespan of TAB LiFePO4 battery. -
Page 15: Charging Method
The maximum charge current (Imax) for TAB d.d. batteries is 1C, however for endurance cycle life TAB d.d. suggests to limit the current to C3 (1C = nominal battery capacity, C3 = 1/3 of nominal capacity). On some chargers the maximum charger active time (t0) can be programmed. -
Page 16: Battery Balancing
Absorption phase In this phase the charge voltage must be maintained at UAbsorption to fully charge TAB d.d. battery and set the SOC counter to 100%, see Table. This phase is finished when the SoC is indicating 100%. Absorption Phase... -
Page 17: Inspection, Cleaning And Maintenance
1. Inspect for loose and/or damaged wiring and contacts, cracks, deformations, leakage or damage of any other kind. If damage to TAB Li-Ion battery is found, it must be replaced by a professional. Do not attempt to charge or use a damaged TAB Li-Ion battery. -
Page 18: Storage
LiFePO4 battery during storage. If these instructions are not followed and TAB Li-Ion LiFePO4 battery has no charge remaining when it is checked, consider it to be damaged. Do not attempt to recharge or use it. Replace it with a new LiFePO4 battery. -
Page 19: Warranty And Liability
(g) any other wrongful use con- trary to the TAB d.d. user manual or the safety instruction, (h) any use contrary to the product specifications of that product; (i) any acts of force majeure. - Page 20 Any liability to the customer in any case ceases to apply in the event that the customer fails to notify TAB d.d. of the existence of the defect within ten (10) days of having discovered the defect, in writing, in order to enable TAB d.d. to investigate the damage.
- Page 21 P U R E E N E R G Y , M A X I M U M P O W E R TAB Tovarna Akumulatorskih Baterij, d.d. Polena 6, SI-2392 Mezica, Slovenia Tel: +386 2 87 02 300 Web: www.tab.si...