Exit Menu - eMachines D845GVSR User Manual

ATAPI CD-ROM Drives Submenu
Feature
1st Drive
NOTE

Exit Menu

Feature
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
2-12
Using the BIOS Setup Program
Options Description
Dependent on Specifies the boot sequence from the available ATAPI CD-ROM drives.
installed To specify boot sequence:
ATAPI CD-ROM
1. Select the boot device with < > or < >.
drives
2. Press <Enter> to set the selection as the intended boot device.
Description
Exits and saves the changes in CMOS RAM.
Exits without saving any changes made in Setup.
Loads the default values for all the Setup options.
Discards changes without exiting Setup. The option values (present when the
computer was turned on) are used.