1. Manuals
  2. Brands
  3. BURGER KING Manuals
  4. Commercial Food Equipment
  5. Taylor C606
  6. Equipment operation manual

BURGER KING Taylor C606 Equipment Operation Manual

Shake and soft serve machine
Hide thumbs
Table of Contents

Advertisement

Quick Links

EQUIPMENT OPERATIONS GUIDE:
START & CHECK
Equipment Operations
Guide
Shake and Soft Serve Machine

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Taylor C606 and is the answer not in the manual?

Questions and answers

Related Manuals for BURGER KING Taylor C606

Summary of Contents for BURGER KING Taylor C606

  • Page 1 EQUIPMENT OPERATIONS GUIDE: START & CHECK Equipment Operations Guide Shake and Soft Serve Machine...
  • Page 2 EQUIPMENT OPERATIONS GUIDE: Shake and Soft Serve Machine Taylor Model C606 Taylor Model Taylor Model C707 Taylor Model C709...
  • Page 3 EQUIPMENT OPERATIONS GUIDE: Taylor Model C606 Start & Check Cleaning & Maintenance Troubleshooting & Repair...
  • Page 4 EQUIPMENT OPERATIONS GUIDE: Taylor Model C606 Daily Sanitizing – Soft Serve Side (1) Item Description Keypads-Shake Display-Vacuum Fluorescent Menu (VFD) Keypad-Menu (Entry/Exit) Keypads-Soft Serve Indicator Light-Mix Out Sw itch-Pow er Standby-Soft Serve Standby-Shake Keypads-Topping Heaters Display-LED (Brush Sanitizing: Clean Countdow n) Calibrate Menu 1.
  • Page 5 EQUIPMENT OPERATIONS GUIDE: Taylor Model C606 Daily Sanitizing – Soft Serve Side (2) 3. Install the pump assembly at the rear of the mix hopper. To position the pump on the drive hub, align the drive hole in the piston with the drive crank of the drive shaft. Secure the pump in place by slipping the pump clip over the collar of the pump, making sure the clip fits into the grooves in the collar...
  • Page 6 EQUIPMENT OPERATIONS GUIDE: Taylor Model C606 Daily Sanitizing – Soft Serve Side (3) 8. Touch the Wash symbol. This will cause the sanitizing solution in the freezing cylinder to be agitated 9. With a pail beneath the door spout, open the draw valve and touch the Pump symbol.
  • Page 7 EQUIPMENT OPERATIONS GUIDE: Taylor Model C606 Daily Sanitizing – Shake Side (1) 1. Prepare a pail of approved 100PPM sanitizing solution. Use warm water and follow the manufacturers specifications 2. Install syrup hole plugs in the syrup ports in the freezer door 3.
  • Page 8 EQUIPMENT OPERATIONS GUIDE: Taylor Model C606 Daily Sanitizing – Shake Side (2) 6. Install the pump end of the mix feed tube and secure with the cotter pin 7. Using the white hopper brush, clean the mix level sensing probes, the mix hopper, mix inlet hole, the outside of the agitator drive shaft housing, the agitator, the air-mix pump, pump clip, mix feed tube and cotter pin 8.
  • Page 9 EQUIPMENT OPERATIONS GUIDE: Taylor Model C606 Daily Sanitizing – Shake Side (3) 12. With a pail beneath the door spout, open and close the draw valve 6 times 13. Touch the Pump symbol to sanitize the inside of the air/mix pump and the mix feed tube 14.
  • Page 10 EQUIPMENT OPERATIONS GUIDE: Taylor Model C606 Daily Sanitizing – Shake Side (4) 17. Remove the cotter pin from the pump. Stand the mix feed tube in the corner of the mix hopper. Place the cotter pin in position in the outlet fitting of the pump 18.
  • Page 11 EQUIPMENT OPERATIONS GUIDE: Taylor Model C606 Priming – Shake Side Priming: 1. With a pail beneath the door spout, touch any Flavor Select symbol to open the draw valve. Pour 2.5 gallons of Fresh mix into the mix hopper and allow it to flow into the freezing cylinder.
  • Page 12 EQUIPMENT OPERATIONS GUIDE: Taylor Model C606 Priming – Soft Serve Side Priming: 1. With a mix pail beneath the door spout, open the draw valve. Pour 2.5 gallons of Fresh mix into the mix hopper and allow it to flow into the freezing cylinder. This will force out any remaining sanitizing solution.

  • Page 13: Draining Product From The Freezing Cylinder

    EQUIPMENT OPERATIONS GUIDE: Taylor Model C606 Draining Product from the Freezing Cylinder (1) Draining Product from the Freezing Cylinder: 1. Place the heater topping switches in the Off position by touching the heater symbols. The symbols will not be illuminated when the heaters are off 2.
  • Page 14 EQUIPMENT OPERATIONS GUIDE: Taylor Model C606 Draining Product from the Freezing Cylinder (2) 6. Remove the locking clip, mix feed tube, pump clip and the assembly air/mix pump. Place the parts into the parts tray 7. Repeat steps 2 through 6 for the soft serve side of the freezer...
  • Page 15 EQUIPMENT OPERATIONS GUIDE: Taylor Model C606 Rinsing Rinsing: 1. Pour 2 gallons of cool, clean water into the shake mix hopper. With the white hopper brush, scrub the mix hopper, mix level sensing probes and the outside of the agitator drive shaft housing. Using the double ended brush, brush clean the mix inlet hole 2.
  • Page 16 EQUIPMENT OPERATIONS GUIDE: Taylor Model C606 Cleaning (1) Cleaning: 1. Prepare a pail of 100PPM cleaning solution. Use warm water and follow the manufacturers specifications 2. Pour the cleaning solution into the hopper and allow it to flow into the freezing cylinder 3.
  • Page 17 EQUIPMENT OPERATIONS GUIDE: Taylor Model C606 Cleaning (2) 6. Open the draw valve on the freezer door and draw off all the solution 7. Once the cleaner stops flowing form the door spout, close the draw valve and touch the Wash symbol, cancelling the wash mode 8.

  • Page 18: Troubleshooting

    EQUIPMENT OPERATIONS GUIDE: Taylor Model C606 Troubleshooting Problem Possible Cause Corrective Action Determine reason for failure and correct it. An equipment fault has Select HEAT symbol to start a heat cycle or occurred WASH to disassemble and brush clean machine Freezer must go through HEAT cycle every 24 More than 24 hours since hours.
  • Page 19 EQUIPMENT OPERATIONS GUIDE: Taylor Model C606 Troubleshooting Problem Possible Cause Corrective Action Low on the mix. The MIX Add mix to the mix hopper. Return to AUTO OUT light is on mode The power switch is in the Place the power switch to ON and select AUTO OFF position Machine not in AUTO Select AUTO and allow machine to cycle off...
  • Page 20 EQUIPMENT OPERATIONS GUIDE: Taylor Model C606 Troubleshooting Problem Possible Cause Corrective Action Freezing cylinder not Drain the freezing cylinder and reprime the primed correctly machine Air/mix pump incorrectly Follow assembly procedures carefully The product is assembled too thick The viscosity control is set Call an authorized service technician too cold Freeze-up in mix inlet hole...
  • Page 21 EQUIPMENT OPERATIONS GUIDE: Taylor Model C606 Troubleshooting Problem Possible Cause Corrective Action Excessive mix Bottom o-ring on draw leakage from valve is improperly Lubricate properly or replace the o-ring the bottom of lubricated or worn door spout The seal on drive shaft is improperly lubricated or Lubricate properly or replace the seal worn...
  • Page 22 EQUIPMENT OPERATIONS GUIDE: Taylor Model C606 Troubleshooting Problem Possible Cause Corrective Action Missing or worn front Install or replace the front bearing bearing Missing or worn front Install or replace the front bearing and beater bearing and beater shoes shoes The freezing Broken freezer door baffle Replace freezer door...
  • Page 23 EQUIPMENT OPERATIONS GUIDE: Taylor Model C606 Troubleshooting Problem Possible Cause Corrective Action The power switch is off Place the power switch in the ON position The shake side is in the Cancel the STANDBY mode STANDBY mode Wait for the completion of the heat treatment A heat cycle is in progress cycle The menu is displayed,...
  • Page 24 EQUIPMENT OPERATIONS GUIDE: Taylor Model C606 Troubleshooting Problem Possible Cause Corrective Action The draw valve was not Reassemble with the correct alignment. Tighten aligned with the actuator the handscrews in a crisscross pattern when bracket when the freezer installing the freezer door door was installed The draw valve was not Lubricate the draw valve and o-rings...
  • Page 25 EQUIPMENT OPERATIONS GUIDE: Taylor Model 632 Key Contacts Taylor Company Rockton, IL 61072 (815) 624-8333...
  • Page 26 EQUIPMENT OPERATIONS GUIDE: Taylor Model 632 Start & Check Cleaning & Maintenance Troubleshooting & Repair...
  • Page 27 EQUIPMENT OPERATIONS GUIDE: Taylor Model 632 START & CHECK Daily Sanitizing (1) Item Description POWER SWITCH MIX LOW Indicator Light MIX Key (Hopper Refrigeration) STANDBY Key WASH Key AUTO Key Thermistor Control Adjustable Draw Handle RESET Button Sanitizing: 1. Prepare 100PPM sanitizing solution. Use warm water and follow manufacturer’s specifications 2.
  • Page 28 EQUIPMENT OPERATIONS GUIDE: Taylor Model 632 START & CHECK Daily Sanitizing (2) 4. Place the POWER SWITCH in the ON position 5. Press the WASH key. Allow the solution to agitate for 5 minutes 6. Place an empty pail beneath the door spout. Raise the prime plug (soft serve side only) 7.
  • Page 29 EQUIPMENT OPERATIONS GUIDE: Taylor Model 632 START & CHECK Daily Sanitizing (3) 8. Close the draw handle and press the WASH key 9. Stand the air tube in the corner of the hopper 10. Repeat steps 1 through 9 for the shake side of the freezer...
  • Page 30 EQUIPMENT OPERATIONS GUIDE: Taylor Model 632 START & CHECK Priming (1) Priming: 1. With a pail beneath the door spout, open the draw handle. Pour 2 gallons of fresh mix into the mix hopper, allowing it to flow into the freezing cylinder. This forces out any remaining sanitizing solution.
  • Page 31 EQUIPMENT OPERATIONS GUIDE: Taylor Model 632 START & CHECK Priming (2) 5. Press the AUTO key which turns on the AUTO light. The light indicates the main refrigeration system is operating. The MIX light will also come on 6. Fill the hopper with mix. As the mix level contacts the mix level sensor, the MIX LOW light will shut off 7.

  • Page 32: Cleaning And Maintenance

    EQUIPMENT OPERATIONS GUIDE: Taylor Model 632 CLEANING & MAINTENANCE Draining Product from the Freezing Cylinder (1) Need picture of Draining Product from the Freezing Cylinder: Auto button w/ arrow 1. Press the AUTO key, cancelling compressor and motor operation 2. Press the MIX key, cancelling the mix hopper refrigeration system 3.
  • Page 33 EQUIPMENT OPERATIONS GUIDE: Taylor Model 632 CLEANING & MAINTENANCE Draining Product from the Freezing Cylinder (2) 5. If local health codes do not permit the use of rerun, the product must be discarded. • Follow the instructions in the previous step, except drain the product into a pail and properly discard the mix 6.
  • Page 34 EQUIPMENT OPERATIONS GUIDE: Taylor Model 632 CLEANING & MAINTENANCE Rinsing Rinsing: 1. Pour 2 gallons of cool clean water into the mix hopper. With brushes, scrub the mix hopper 2. With a pail beneath the door spout, raise the prime plug and press the WASH key 3.
  • Page 35 EQUIPMENT OPERATIONS GUIDE: Taylor Model 632 CLEANING & MAINTENANCE Cleaning (1) Cleaning: 1. Prepare a pail of approved 100 PPM cleaning solution. Use warm water and follower manufacturer’s specifications 2. Push down the prime plug (soft serve only). Pour the cleaning solution into the mix hopper 3.
  • Page 36 EQUIPMENT OPERATIONS GUIDE: Taylor Model 632 CLEANING & MAINTENANCE Cleaning (2) 5. Place an empty pail beneath the door spout and raise the prime plug (soft serve only) 6. When a steady stream of cleaning solution is flowing from the prime plug opening in the bottom of the freezer door (soft serve only), open the draw handle.

  • Page 37: Troubleshooting And Repair

    EQUIPMENT OPERATIONS GUIDE: Taylor Model 632 TROUBLESHOOTING & REPAIR Troubleshooting Problem Possible Cause Corrective Action Call a service technician to adjust the mix hopper Freeze-up in mix inlet hole temperature Beater motor out on reset Reset the freezer No product is The beater is rotating being Contact service technician to correct rotation to...
  • Page 38 EQUIPMENT OPERATIONS GUIDE: Taylor Model 632 TROUBLESHOOTING & REPAIR Troubleshooting Problem Possible Cause Corrective Action The mix in the The temperature is out of Call a service technician to adjust the mix hopper mix hopper is adjustment temperature too cold The temperature is out of Call a service technician to adjust the mix hopper adjustment...
  • Page 39 EQUIPMENT OPERATIONS GUIDE: Taylor Model 632 TROUBLESHOOTING & REPAIR Troubleshooting Problem Possible Cause Corrective Action Missing or worn drive shaft Install or replace regularly seal on drive shaft Excessive mix leakage into the rear drip pan The rear shell bearing is Call a service technician to replace rear shell worn bearing...

  • Page 40: Key Contacts

    EQUIPMENT OPERATIONS GUIDE: Taylor Model 632 TROUBLESHOOTING & REPAIR Key Contacts Taylor Company Rockton, IL 61072 (815) 624-8333...
  • Page 41 EQUIPMENT OPERATIONS GUIDE: Taylor Model C707 Start & Check Cleaning & Maintenance Troubleshooting & Repair...
  • Page 42 EQUIPMENT OPERATIONS GUIDE: Taylor Model C707 START & CHECK Daily Sanitizing (1) Item Description MIX LOW Indicator Light MIX OUT Indicator Light MIX REF Key STANDBY Key WASH Key AUTO Key RESET Button – Beater Motor Pow er Sw itch (Toggle) Hopper Temperature Indicator Flavor Burst Jack...
  • Page 43 EQUIPMENT OPERATIONS GUIDE: Taylor Model C707 START & CHECK Daily Sanitizing (2) 4. Place the POWER SWITCH in the ON position 5. Press the WASH key. Allow the solution to agitate for 5 minutes 6. Place an empty pail beneath the door spout. Raise the prime plug (soft serve side only) 7.
  • Page 44 EQUIPMENT OPERATIONS GUIDE: Taylor Model C707 START & CHECK Daily Sanitizing (3) 8. Once the sanitizing stops flowing from the door spout, raise the draw handle. Press the WASH key to cancel the beater motor operation 9. Lubricate the mix feed tube O-rings on the end of the tube with the small hole on the side.
  • Page 45 EQUIPMENT OPERATIONS GUIDE: Taylor Model C707 START & CHECK Priming (1) Priming: 1. Place an empty pail beneath door spout and lower the draw handle. With prime plug in up position, pour 2 gallons of fresh mix into the hopper and allow it to flow. This will force out any remaining sanitizing solution.
  • Page 46 EQUIPMENT OPERATIONS GUIDE: Taylor Model C707 START & CHECK Priming (2) 4. Press the AUTO key. When the machine cycles off, the product will be at serving viscosity 5. Fill the hopper with fresh mix. As the mix level comes in contact with the mix level sensing probe on the front wall of the hopper, the MIX LOW light will shut off...

  • Page 47: Draining Product From The Freezing Cylinder

    EQUIPMENT OPERATIONS GUIDE: Taylor Model C707 CLEANING & MAINTENANCE Draining Product from the Freezing Cylinder Draining Product from the Freezing Cylinder: 1. Press the AUTO key, cancelling compressor and beater motor operation 2. Press the MIX REF key, cancelling the mix hopper refrigeration system 3.
  • Page 48 EQUIPMENT OPERATIONS GUIDE: Taylor Model C707 CLEANING & MAINTENANCE Rinsing Rinsing: 1. Pour 2 gallons of cool clean water into the mix hopper. With brushes, scrub the mix hopper 2. With a pail beneath the door spout, raise the prime plug and press the WASH key 3.
  • Page 49 EQUIPMENT OPERATIONS GUIDE: Taylor Model C707 CLEANING & MAINTENANCE Cleaning (1) Cleaning: 1. Prepare a pail of approved 100 PPM cleaning solution. Use warm water and follower manufacturer’s specifications 2. Push down the prime plug. Pour the cleaning solution into the mix hopper 3.
  • Page 50 EQUIPMENT OPERATIONS GUIDE: Taylor Model C707 CLEANING & MAINTENANCE Cleaning (2) 5. Place an empty pail beneath the door spout and raise the prime plug 6. When a steady stream of cleaning solution is flowing from the prime plug opening in the bottom of the freezer door, lower the draw handle.
  • Page 51 EQUIPMENT OPERATIONS GUIDE: Taylor Model C707 CLEANING & MAINTENANCE Disassembly Disassembly: 1. Be sure the power switch is in the OFF position. Make sure no control panel lights are on 2. Remove the handscrews, freezer door, beater, scraper blades, and driveshaft from the freezing cylinder. Take these parts to the sink for cleaning 3.

  • Page 52: Manual Brush-Cleaning

    EQUIPMENT OPERATIONS GUIDE: Taylor Model C707 CLEANING & MAINTENANCE Manual Brush-Cleaning (1) Manual Brush-Cleaning: 1. Prepare a sink with an approved cleaning solution. Use warm water and follow the manufacturer’s specifications. If another approved cleaner is used, dilute according to label instructions •...
  • Page 53 EQUIPMENT OPERATIONS GUIDE: Taylor Model C707 CLEANING & MAINTENANCE Manual Brush-Cleaning (2) 4. Return to the freezer with a small amount of cleaning solution. With the black bristle brush, brush-clean the rear shell bearing at the back of the freezing cylinder. Brush- clean the drive hub opening in the rear wall of mix hopper 5.

  • Page 54: Troubleshooting And Repair

    EQUIPMENT OPERATIONS GUIDE: Taylor Model C707 TROUBLESHOOTING & REPAIR Troubleshooting Problem Possible Cause Corrective Action Call a service technician to adjust the mix hopper Freeze-up in mix inlet hole temperature Beater motor out on reset Reset the freezer No product is being dispensed with The beater is rotating...
  • Page 55 EQUIPMENT OPERATIONS GUIDE: Taylor Model C707 TROUBLESHOOTING & REPAIR Troubleshooting Problem Possible Cause Corrective Action The mix in the The temperature is out of Call a service technician to adjust the mix hopper mix hopper is adjustment temperature too cold The temperature is out of Call a service technician to adjust the mix hopper adjustment...
  • Page 56 EQUIPMENT OPERATIONS GUIDE: Taylor Model C707 TROUBLESHOOTING & REPAIR Troubleshooting Problem Possible Cause Corrective Action Missing or worn driveshaft Install or replace regularly seal on driveshaft Excessive mix leakage into the rear drip pan The rear shell bearing is Call service technician to replace rear shell worn bearing Missing or worn draw...

  • Page 57: Key Contacts

    EQUIPMENT OPERATIONS GUIDE: Taylor Model C707 TROUBLESHOOTING & REPAIR Key Contacts Taylor Company Rockton, IL 61072 (815) 624-8333...
  • Page 58 EQUIPMENT OPERATIONS GUIDE: Taylor Model C709 Start & Check Cleaning & Maintenance Troubleshooting & Repair...
  • Page 59 EQUIPMENT OPERATIONS GUIDE: Taylor Model C709 START & CHECK Daily Sanitizing (1) Item Description Pow er Sw itch Liquid Crystal Display Keypads Mix Out Indicator Standby Key Mix Low Indicator Select Key Service Menu Key Brush Clean Counter Arrow Keys Sanitizing: 1.
  • Page 60 EQUIPMENT OPERATIONS GUIDE: Taylor Model C709 START & CHECK Daily Sanitizing (2) 4. Place the POWER SWITCH in the ON position 5. Press the WASH key. Allow the solution to agitate for 5 minutes 6. Place an empty pail beneath the door spout. Open and close the draw valve 6 times.
  • Page 61 EQUIPMENT OPERATIONS GUIDE: Taylor Model C709 START & CHECK Daily Sanitizing (3) 8. Lubricate the O-rings on the inner and outer feed tubes. Do not lubricate the O-ring on the air orifice. Place the inner feed tube inside the outer feed tube 9.
  • Page 62 EQUIPMENT OPERATIONS GUIDE: Taylor Model C709 START & CHECK Priming Priming: 1. With a pail beneath the door spout(s), open the draw valve. Pour 2.5 gallons of fresh mix into the mix hopper and allow the mix to flow into the freezing cylinder. This process forces out any remaining sanitizing solution.
  • Page 63 EQUIPMENT OPERATIONS GUIDE: Taylor Model C709 CLEANING & MAINTENANCE Draining Product from the Freezing Cylinder Draining Product from the Freezing Cylinder: 1. Press the AUTO key, cancelling the compressor and beater motor operation 2. Remove the hopper cover, the agitator paddle, and the assembled feed tube.
  • Page 64 EQUIPMENT OPERATIONS GUIDE: Taylor Model C709 CLEANING & MAINTENANCE Rinsing Rinsing: 1. Pour 2 gallons of cool clean water into the mix hopper. With brushes, scrub the mix hopper 2. With a pail beneath the door spout, raise the prime plug and press the WASH key 3.
  • Page 65 EQUIPMENT OPERATIONS GUIDE: Taylor Model C709 CLEANING & MAINTENANCE Cleaning (1) Cleaning: 1. Prepare a pail of approved 100 PPM cleaning solution. Use warm water and follower manufacturer’s specifications 2. Pour the solution into the hopper and allow the solution to flow into the freezing cylinder 3.
  • Page 66 EQUIPMENT OPERATIONS GUIDE: Taylor Model C709 CLEANING & MAINTENANCE Cleaning (2) 5. Place an empty pail beneath the door spout 6. Open the draw valve on the freezer door and draw off all the solution 7. Once the cleaning solution stops flowing from the door spout, close the draw valve and press the Wash key, cancelling the Wash mode...
  • Page 67 EQUIPMENT OPERATIONS GUIDE: Taylor Model C709 CLEANING & MAINTENANCE Disassembly Disassembly: 1. Be sure the power switch is in the OFF position 2. Remove the handscrews, freezer door, beater and scraper blades, and drive shaft with drive shaft seal from the freezing cylinder 3.
  • Page 68 EQUIPMENT OPERATIONS GUIDE: Taylor Model C709 CLEANING & MAINTENANCE Manual Brush-Cleaning Manual Brush-Cleaning: 1. Prepare an approved 100PPM cleaning solution. Use warm water and follow the manufacturer’s specifications 2. Remove all O-rings 3. Thoroughly brush clean all disassembled parts in the cleaning solution, making sure all lubricant and mix film is removed.
  • Page 69 EQUIPMENT OPERATIONS GUIDE: Taylor Model C709 TROUBLESHOOTING & REPAIR Troubleshooting Problem Possible Cause Corrective Action The freezer must go through a heat cycle every More than 24 hours since 24 hours. The freezer must be disassembled and the last heat cycle brush cleaned or placed in a heat cycle Move the power switch to the on position.
  • Page 70 EQUIPMENT OPERATIONS GUIDE: Taylor Model C709 TROUBLESHOOTING & REPAIR Troubleshooting Problem Possible Cause Corrective Action Low on mix. The Mix Out Add mix to the mix hopper. Return to Auto mode light is on The power switch is in the Move the power switch to the on position and off position select Auto...
  • Page 71 EQUIPMENT OPERATIONS GUIDE: Taylor Model C709 TROUBLESHOOTING & REPAIR Troubleshooting Problem Possible Cause Corrective Action Adjust draw rate of 5 oz. to 7.5 oz. (142g to Draw rate is set too fast 213g) of product by weight in 10 seconds Not enough air space Allow for adequate air flow across the condenser around unit...
  • Page 72 EQUIPMENT OPERATIONS GUIDE: Taylor Model C709 TROUBLESHOOTING & REPAIR Troubleshooting Problem Possible Cause Corrective Action The mix in the The hopper temperature is hopper is too Call an authorized service technician out of adjustment cold Mix Low & Mix Milkstone buildup in the Out probes are Clean hopper thoroughly hopper...
  • Page 73 EQUIPMENT OPERATIONS GUIDE: Taylor Model C709 TROUBLESHOOTING & REPAIR Troubleshooting Problem Possible Cause Corrective Action Mix and lubricant collected Brush clean the rear shell bearing area regularly in drive coupling The drive shaft Rounded corners of drive is stuck in the shaft, drive coupling, or Call an authorized service technician drive coupling...
  • Page 74 EQUIPMENT OPERATIONS GUIDE: Taylor Model C709 TROUBLESHOOTING & REPAIR Troubleshooting Problem Possible Cause Corrective Action Unit is unplugged Plug into wall receptacle No freezer operation after The circuit breaker is off, or Turn the circuit breaker on, or replace the fuse pressing the the fuse is blown Auto key...

This manual is also suitable for:

Taylor 632Taylor c707Taylor c709

Table of Contents

Save PDF