Sony Airpeak S1 Help Manual page 73

Help Guide
Airpeak S1
ARS-S1
Configuring the gimbal settings
You can configure settings related to the gimbal's movement.
Tap [Start flight] on the "Airpeak Flight" App Home page.
1
The flight screen will be displayed.
Tap (Settings) in the top right of the screen.
2
Tap [Gimbal] in the displayed setting menu.
3
Tap [Main control].
4
Set the following items.
5
[Gimbal control mode]:
[Lock]: The camera orientation (shooting direction) will remain the same even if the aircraft turns.
[Follow]: The camera orientation (shooting direction) follows the panning (left/right) movement of the aircraft.
Maximum speed (Pan/Tilt/Roll): You can set the maximum speed of movement along each axis.
Smoothness (Pan/Tilt/Roll): You can set the smoothness of movement along each axis.
EXPO (Pan/Tilt): You can set the amount of movement along each axis with respect to the input from the control
sticks on the remote controller. To prevent the sticks from reacting when you are not touching them, you can set
the range within which the sticks do not react in [Deadzone].
Related Topic
Parts and controls (Remote controller)
Parts and controls (Gimbal (sold separately))
Features of the "Airpeak Flight" App
Adjusting the sensitivity of the control sticks
5-027-737-11(1) Copyright 2021 Sony Group Corporation
73