Extreme Networks Virtual Chassis Installation Manual page 9

Table 1: Summit Virtual Chassis LEDs (continued)
Unit Status
LEDs
SummitLink Port Status LEDs
Link
TX Activity
RX Activity
S
UMMIT
Figure 4 shows the rear panel view of the Summit Virtual Chassis.
Power socket A
Power socket B
Figure 4: Summit Virtual Chassis rear panel
P
OWER
The Summit Virtual Chassis has two power sockets. The upper power socket provides
power to one of the internal Summit Virtual Chassis power supplies. It also provides
redundant load-shared power to the Summit switch connected to the Summit Virtual
Chassis using RPS port A.
S V C D
UMMIT IRTUAL HASSIS ESIGN AND
Color Indicates
Green Link is present.
Yellow Link error.
Off No link, or either the Summit Virtual Chassis or the Summit
switch attached to this port is powered off.
Yellow Frames are being transmitted on this port.
Off No transmit activity detected on this port.
Yellow Frames are being received on this port.
Off No receive activity detected on this port.
V C
IRTUAL HASSIS
S
OCKETS
I G
NSTALLATION UIDE
R V
EAR IEW
RPS port A
RPS port B
S V C R
UMMIT IRTUAL HASSIS EAR
V
IEW
7