Advertisement
3.9
PEAK HOLD MODE OPERATION
START
Max. Target Value
Current Max. Value
(Peak Hold)
((...((...
...))...)) ((...((...
n n n
Buzzer
Over Max. Target Value
((((((((
))))))))
n n n
Buzzer
Note:
1.
If the display shows
of more than 110% of the maximum specification applied.
2.
The green LED will be on for 90% of maximum setting
torque.
3.
The red LED will be on 100% of maximum setting torque.
5.
DECLARATION OF CONFORMITY
Declaration of Conformity We, the sole importer into the uK, declare that the product listed below is in conformity with the following
standards and directives.
Digital Torque Wrench
Model No: STW298
2002/95/EC RoHS Directive
2002/96/EC WEEE Directive
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our catalogue and latest promotions call us on 01284 757525 and leave your full name, address and postcode.
(System initial)
*Note 1
Apply Torque
Released
Apply Torque
Flashing
Over 90% of Max. Target Value
...)) ...))
Green LED
Over 90% of Set Torque
*Note 2
((((((((
))))))))
*Note 3
Red LED
Over Max. Set Torque
the wrench has had a torque
Signed by Steve Buckle
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products.
The construction file for this product is held by the Manufacturer and may be inspected on request by
contacting Jack Sealey Ltd.
Sole U.K. Distributor
Sealey Group
Bury St. Edmunds
Suffolk.
4.
CALIBRATION & MAINTENANCE
4.1
CALIBRATION
Annual recalibration of the torque wrench is necessary to
maintain accuracy. Please contact your Sealey dealer.
4.2
BATTERY MAINTENANCE
For replacement of batteries refer to section 3.1. Ensure that
contacts are clean before replacing batteries.
Note: If the wrench is not used for an extended period of time, remove
the batteries.
WARNING! DO NOT mix battery types or combine used
batteries with new ones.
4
Dispose of used batteries in accordance with local authority
regulations.
8
DO NOT throw batteries into a fire.
01284 757500
01284 703534
5th June 2009
www.sealey.co.uk
Web
sales@sealey.co.uk
e-mail
STW298
Issue No: 1 - 02/06/09
Advertisement
