TEFAL Express Essential Manual page 15

Problem Possible Causes
Water streaks Your ironing board is
appear on saturated with water
because it is not
the linen.
suitable for use with
an appliance.
Brown streaks You are using
come through chemical descaling
the holes in agents or additives in
the soleplate the water ironing.
and stain the
linen.
The soleplate You are ironing at too
is dirty or high a temperature.
brown and
may stain the
linen.
The "anti calc" The anti calc
indicator is cartridge is no longer
flashing*. efficient.
The descaling
procedure must be
performed.
Solutions
Check that your ironing
board is suitable. We
recommend that you
use a vented/mesh
type ironing board.
Never add this type of
product in the water
tank (see "for what
water may be used").
Contact an Approved
Service Centre.
See our
recommendations
regarding temperature
control setting.
Replace the anti scale
cartridge with a new
one then press the
reset button for a
minimum of 3 seconds.
See section "Descaling
your generator. " In this
manual to perform the
descaling procedure.
28
Problem Possible Causes
The anti calc You have not pressed
indicator the reset button.
is still
flashing after
replacing the
cartridge.
The anti calc The descaling
indicator procedure has not
is still been correctly done.
flashing after
performing
the descaling
procedure.
* Depending on the model
If you have any problems or queries please call our Customer
Relations team first for expert help and advice
Solutions
Press the reset button
until the light stops
flashing.
See section "descaling
your generator".