Progeny P66 User Manual page 4

Using Your P66
Press the main power button，the power station will be turned on.
Press POWER and Press the DC/USB/AC/LED button to turn on
corresponding output port(when not using certain ports, make sure
to turn them off to conserve power)
You'll know the output port is turned on when the green LED light
on the button is illuminated
Press the "POWER" button to turn on/off the LED display
Notice:
Please use this power station to power your device at temperatures
1.
ranging from -10℃~45℃
2. Before using, please check whether the power of your device exceeds
the output range of this unit. This power station will enter protection
mode if the power of your device exceeds the output range
USB OUTPUT
1. Press the main power button, and then press the "USB" power
button, USB output and Wireless charging will be turned on, the green
LED light on the button is illuminated.
2. Plug your devices into corresponding ports.
Main Power Button
USB
USB Power Button
03
DC OUTPUT
1. press the main power button, and then press the "DC" power
button, the DC output will be turned on, the green LED light on the
button is illuminated.
2. Plug your devices into corresponding ports, you will see the amount of
power(watts) your devices are using marks on the LED display
USB
AC OUTPUT
1. press the main power button, and then press the "AC" power
button, the AC output will be turned on, the green LED light on the
button is illuminated.
2. Plug your devices into corresponding ports, you will see the amount
of power(watts) your devices are using marks on the LED displa
Main Power Button
Main Power Button
DC Power Button
DC
AC Power Button
04