Transmittable Documents - Sharp FACSIMILE UX-108 Service Manual

[3] Transmittable documents

1. Document Sizes
width
Normal size
length
(Max.)
A4 size
(Min.)
297mm
140mm
148mm 216mm
[Normal size]
Use document carrier sheet for smaller documents.
* With special sizes, only one sheet can be fed into the machine at a
time. Insert next page into feeder as current page is being scanned.
2. Paper Thickness & Weight
Thickness
ADF 10
Normal size
sheets
Weight
Thickness 0.12–0.20 mm
Special size
Weight
3. Document Types
• Normal paper
Documents handwritten in pencil (No. 2 lead or softer), fountain pen,
ball-point pen, or felt-tipped pen can be transmitted.
Documents of normal contrast duplicated by a copying machine can
also be transmitted.
• Diazo copy (blue print)
Diazo copy documents of a normal contrast may be transmitted.
• Carbon copy
A carbon copy may be transmitted if its contrast is normal.
4. Cautions on Transmitting Documents
• Documents written in yellow, greenish yellow, or light blue ink cannot
be transmitted.
• Ink, glue, and correcting fluid on documents must be dry before the
documents can be transmitted.
• All clips, staples and pins must be removed from documents be-fore
transmission.
• Patched (taped) documents should be copied first on a copier and
then the copies used for transmission.
• All documents should be fanned before insertion into the feeder to
prevent possible double feeds.
148 – 216 mm
140 – 297 mm
(Max.)
600mm
216mm
[Special size]
0.06–0.12 mm
2
52–104g/m
14–28lbs
2
52–157 g/m
5. Automatic Document Feeder Capacity
Number of pages that can be placed into the feeder at anytime is as
follows:
Normal size: max. ADF 10 sheets
Special size: single sheet only (manual feed)
•
NOTES: When you need to send or copy more pages than the feeder
limit, place additional pages in feeder when last page in
feeder is being scanned.
•
Place additional pages carefully and gently in feeder.
If force is used, double-feeding or a document jam may
result.
6. Readable Width & Length
The readable width and length of a document are slightly smaller than
the actual document size.
Note that characters or graphics outside the effective document scan-
ning range will not be read.
•
Readable width
210 mm, max.
•
Readable length
This is the length of the document sent minus 4 mm from the top and
bottom edges.
1 – 3
Readable width
4mm
Readable length
4mm
UX-108DE