Installing Batteries
Your Texas Hold 'Em requires
two AAA batteries, not included.
To install the batteries, carefully
turn the unit over so that it is face-
down on a soft surface. Find the
battery compartment on the back
of the unit.
Use a small Phillips screwdriver
to remove the screw. Lift off the
Texas Hold 'Em may lock up due
If this should happen, use a slim,
pointed object to press the button
marked "
to static discharge.
" on the front of the unit.
RESET
battery compartment lid. Install
the batteries, making sure to
match polarity (+ and -) with the
diagram inside the battery com-
partment (see diagram below.)
Place the tab of the battery com-
partment lid in its slot and close
the compartment door. Replace
the screw and tighten it carefully.
3