Table of Contents
Advertisement
B.2
Device Drivers Installation
If you already have an operating system installed into your notebook
computer, it is best to install the needed device drivers for using the
built-in devices of your computer. Before installing the drivers, check
with your dealer first if they have already installed all the drivers along
with the operating system. If not, follow the procedures below:
Installing Windows Vista from Optical Disk Drive
To install Windows Vista directly from your optical disk drive, please
go to Boot menu of BIOS setup menu. Use arrow key to select "CD-
ROM Drive", then use "+" or "-" to move it to the top. Go to Exit menu
and select "Exit Saving Changes". Accordingly, insert the Windows
Vista installation CD into optical disk drive with following the
instructions on the screen to finish the installation.
Installing the VGA Device Driver
Following is the procedure for installing the Video Accelerator 3D
Adapter VGA driver to your computer:
Installing VGA device driver for Windows Vista 32
1. Click the Start button, then point to Run. The Run dialog
box appears.
2. Click the Browse button and specify the directory as.
"E:\Drivers\Vista32\VGA\Setup.exe".
3. Click "Continue" to install.
4. Click "Next" to execute the setup program. The Setup box
appears.
5. Press "Finish" to complete the installation.
Installing the Audio Device Driver
Your notebook computer uses the VIA Azalia VT1708A Audio
controller.
Installing Audio device driver for Windows Vista 32
1. Click the Start button, then point to Run. The Run dialog
box appears.
81
Appendix B
Advertisement
Table of Contents
