Table of Contents
Advertisement
I
M
NSTALLING
Your computer comes with standard 256 MB, 512MB or 1024MB of
synchronous DDR SDRAM. You can increase system memory to a maximum
of 2048 MB in the system, by installing two small outline double inline memory
modules (SO-DIMMs) with installed base memory in the system.
The 256MB, 512MB and 1024MB memory modules are available:
To install the memory module:
1.
Make sure the system is powered off, the battery also is removed and that
no peripheral devices are attached.
2.
Turn the computer upside-down and locate the screws that secure the
DIMM door at the underside of the notebook.
3.
Remove the screws and open the DIMM cover by your finger.
4.
Locate the memory module into the empty memory module sockets.
(Your system comes with one memory module already installed in the
socket.)
+
Avoid touching the exposed components inside the system. Doing so may
damage the system.
M
EMORY
ODULE
7
Using Options
103
Advertisement
Table of Contents
