Table of Contents
Advertisement
10. Set unlock time
Setting of the unlock time is indicated in seconds from 00 to 99. The setting 02 will be equal to 2
seconds unlock. If 00 is set, the controller will be unlocked by the card and wait for any other card
to be read to block.
To change the unlock time, put the controller in setup mode. In this mode, the controller keyboard
flashes slowly, the controller waits for a command to be entered.
To set the unlock time: press "4" (the device's keyboard starts flashing quickly) + "02" (enter the
unlock time in seconds) + "#" to confirm the unlock time, the controller will emit two short beeps:
11. Security Modes setting
The built-in controller can operate in one of three modes:
1. The controller accepts and unlocks only by cards added to memory. Mode code "00".
2. The controller accepts and unlocks by cards or a PIN code. Mode code "01".
3. The controller accepts and unlocks only by cards and then entering the PIN code for this card.
Mode code "02".
To change the operating mode, put the controller in setup mode. In this mode, the controller
keyboard flashes slowly, the controller waits for a command to be entered.
To set the desired mode: press "3" (the device's keyboard starts flashing quickly) + "00" (operating
mode - only on cards) + "#" to confirm the setting, the controller will emit two short beeps:
The controller supports access card locking mode. When the lock mode is on, using the same access
card for 5 minutes or entering the wrong password for the access card 10 times in a row will cause
the controller to lock for 2 minutes. During this time, the controller stops accepting cards and
passwords, the call button is locked and does not respond to pressing or touching. After 2 minutes,
the controller returns to normal operation.
The mode codes are: "lock is disabled" is "00", "lock is enabled" is "01".
Command: "4" + "03" + "#"
Command: "3" + "00" + "#" (by card)
Command: "3" + "01" + "#" (by card or PIN code)
Command: "3" + "02" + "#' (by card and PIN code)
8
Advertisement
Table of Contents
