Page 2
PI30 Field Array Speaker Thank you for purchasing this PI30 Field Array Speaker for use in school, business, house of worship and government facilities. I invite you to register your product online for warranty coverage at our website: www.califone.com — while you’re there —...
Page 3
PI30 1 6 - C H A N N E L U H F P O W E R E D F i E L D A R R A y S P E A k E R S P E C i F i C A t i O N S UHF Channel Selector 1/4”...
Page 4
F i E L D A R R A y S P E A k E R S P E C i F i C A t i O N S For Wall Mounting of PI30 Series Field Array Speaker Volume On/Off and Volume Control Tone Control Audio Line-In RCA Jacks 1/4”...
Page 5
F i E L D A R R A y S P E A k E R S P E C i F i C A t i O N S Clamping to a White Board for PI30 Series Field Array Speaker Spring Loaded Terminals...
Page 6
Setup and Operation for Powered Array Speakers (PI30 and PI30-PS) Power Plug the power adapter into a standard AC outlet and the DC plug into either of the DC jacks on the rear of the speaker. Microphone For a cabled microphone, plug it into one of the 1/4” phone jacks before turning on the power. Turn the power ON (the red LED will light) and adjust the volume to the desired level while speaking into the microphone.
Specifications Speaker System (PI30, PI30-PS and PI30-SP) Power Capacity 30 Watts RMS power capacity, 6 Ohms impedance Sound Pressure Level: 93 dB, 1 Watt @ 1 Meter Dispersion: -3dB @ 120 degrees off axis Frequency Response: 250Hz to 12KHz Transducers: Three each 3.5”...
TAKEN SO THAT THE GROUNDING OR POLARIZATION MEANS OF THE APPLIANCE ARE NOT DEFEATED. Califone® International Inc. • 1145 Arroyo Avenue, # A • San Fernando, CA 91340 USA Toll Free 800.722.0500 | Toll Free Fax 877.402.2248 International Customers call 818.407.2400 or Fax 818.407.2405 califone.com...
Need help?
Do you have a question about the PI30 and is the answer not in the manual?
Questions and answers