Parts List; Specifications - EverFocus ERK-871 Instruction Manual

C H A P T E R 1 P R O D U C T

Parts List

Please be careful when you unpack the box due to the electronics devices inside. Check
and make sure that you have all the items below inside the original box:
1 125kHz Proximity Reader
1 User manual
2 ST4*20 self-tapping panhead screws
2 M4*20 screws
1 L-type Spanner
If an item appears to have been damaged in shipment, replace it properly in its carton
and notify the shipper. If any items are missing, notify your Everfocus Electronics
Corp. Sales Representative or Customer Service. The shipping carton is the safest
container in which the unit may be transported. Save it for possible future use.
In addition, EverAccess recommends the following parts, to be provided by the
installer:
9 Wire Splice
1 DC Power Supply, 6.5-18VDC, 150mA
Up to 500 ft. Cable, 22AWG, 5 Conductor

Specifications

Frequency
Data format
Read range
Read time
Output format
Audio
Indicator
Power supply
Operation
temperature
Dimension
Transition distance
Tamper switch
Keypad
O V E R V I E W
Regular reader
5-12cm (2-4.7")
Wiegand 26 and Special RS232 format for EverAccess controller
Built-in Buzzer, 2 kHz
6.5V-18V DC, Max:150mA
4.85"x3.03"x0.76"
(12.3x7.7x1.9cm)
N/A
2
Keypad reader
125 KHz
64 bit
5-12cm (2-4.7")
200 ms
3 LEDs:
Red: Power
Green: Card Present
Yellow: Outer Source
14°F-0°F (-10°-60°C)
4.85"x3.03"x0.85"
(12.3x7.7x2.1cm)
500 ft.
Yes, Normally Closed
4*4
Mullion reader
5-10cm (2-3.9")
5.52"x1.58"x0.95"
(14.0x4.0x2.4cm)
N/A