Table of Contents
Advertisement
12
www.electrolux.com
7. DIAL AND BUTTONS
7.1 Introduction
The options/functions are
not available with all
washing programmes.
Check the compatibility
between options/functions
and washing programmes in
the "Programme Chart". An
option/function can exclude
another one, in this case the
appliance doesn't allow you
to set incompatible options/
functions.
7.2 On/Off
Press this button for a few seconds to
activate or deactivate the appliance. Two
different tunes sound while switching the
appliance on or off.
As the Stand-by function automatically
deactivates the appliance after several
Delay start indicator.
Door locked indicator.
The digital indicator can show:
• Programme duration (e. g.
• Delay time (e. g.
• Cycle end (
• Warning code (e.g.
Time Manager bars level indicator.
Maximum laundry weight indicator.
Add garments indicator. Lights on during the beginning of the
Wash phase, while the user can still pause the appliance and
add more laundry.
Drum clean indicator.
Night indicator.
Rinse Hold indicator.
The spin area:
Spin speed indicator
No Spin indicator. Spin phase is off.
).
).
).
).
minutes to reduce the energy
consumption, you may need to activate
the appliance again.
For more details, refer to Stand-by
paragraph in Daily Use chapter.
7.3 Temp.
When you select a washing programme,
the appliance automatically proposes a
default temperature.
Touch this button repeatedly until the
desired temperature value appears on
the display.
When the display shows the indicators
, the appliance does not heat the
water.
7.4 Spin
When you set a programme, the
appliance automatically sets the
Advertisement
Table of Contents
