Polygroup TV50P3B31L03 Assembly Instructions

Available languages

Download this manual

TREE ASSEMBLY INSTRUCTIONS

Insert Green

Label Extension

Cord into Adaptor

STORAGE:

(1) Unplug light string from the wall outlet and remove all ornaments and decorations.

(2) Gently lift off the top, and remove the bottom section from the tree pot.

(3) Carefully replace the tree in its box and tape it shut.

DO NOT STORE TREE IN A DAMP AREA OR IN AN AREA WHERE THE TEMPERATURE EXCEEDS

100º F.

MODEL#: TV50P3B31L03

1. Insert tree body into the weighted pot.

2. Insert the tree top into the trunk of the

main body. (as shown in fig.1)

Fig. 1

3. Shape the branches. Shift branches to

fill any gaps, lightly upsweep all

branch tips for a uniform look. Your

tree is now ready to decorate.

4. Plug the cord into wall outlet.

Adaptor

To Be Plugged

Into Wall

Outlet

Need help?

Do you have a question about the TV50P3B31L03 and is the answer not in the manual?

Page 1 (2) Gently lift off the top, and remove the bottom section from the tree pot. (3) Carefully replace the tree in its box and tape it shut. DO NOT STORE TREE IN A DAMP AREA OR IN AN AREA WHERE THE TEMPERATURE EXCEEDS 100º F. MODEL#: TV50P3B31L03...
Page 2 (2 ) Soulever délicatement le dessus et retirer la section inférieure du contenant de l'arbre. (3 ) Remettre soigneusement l’arbre dans la boîte et la sceller avec du ruban gommant. N’ENTREPOSEZ PAS L’ARBRE DANS UN ENDROIT HUMIDE OU DANS UN ENDROIT OÙ LA TEMPÉRATURE EXCÈDE 100° F. No DE MODÈLE: TV50P3B31L03...
Page 3 (2) Levante suavemente la parte superior y retire la sección inferior del pie del árbol. (3) Coloque cuidadosamente el árbol en su caja y coloque cinta adhesiva para cerrar. NO ALMACENE EN UNA ZONA HÚMEDA O EN UN ÁREA DONDE LA TEMPERATURA EXCEDA LOS 100° F. N° DE MODELO: TV50P3B31L03...