Jonsered GT 2128CD Operator's Manual page 15

T T o add grease to the bevel gear
Make sure that the bevel gear is filled 3/4 full with bevel
gear grease.
Engine Specifications
Cylinder displacement
Electrode gap
Fuel tank volume
Idling speed
Maximum power speed
Power output
Spark plug
Maximum output shaft rotation
Emissions durability period
Noise and Vibration Data
Equivalent vibration level (ahv, eq) left handle - see note 1
Equivalent vibration level (ahv, eq) right handle - see note 1
Sound power level, guaranteed (L
Sound power level, measured - see note 2
Sound pressure level at operator's ear - see note 3
Product Dimensions
Weight (excluding cutting equipment)
Note 1: Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 1 m/s
Note 2: Noise emissions in the environment measured as sound power (L
2000/14/ EC. Reported sound power level for the machine has been measured with the original cutting attachment
that gives the highest level. The difference between guaranteed and measured sound power is that the guaranteed
sound power also includes dispersion in the measurement result and the variations between different machines of
the same model according to Directive 2000/14/EC.
Note 3: Reported data for equivalent sound pressure level for the machine has a typical statistical dispersion (stand-
ard deviation) of 1 dB (A).
460 - 001 - 03.11.2017
TECHNICAL DATA
) - see note 2
WA
(Fig. 56 )
unit GT 2128CD
LT28CCJN
3
cm 28
mm 0,6
3
cm 400
-1
min 2300-3200
-1
min 8000
kW 0,7
Champion RCJ-8Y Champion RCJ-8Y
-1
min 8000
h 125
2
m/s 9,2
2
m/s 5,4
dB(A) 114
dB(A) 106
dB(A) 98
kg 4,4
) in conformity with EC directive
WA
GT 2128SD
LT28CSJN
28
0,6
400
2300-3200
8000
0,7
7200
125
6,8
5,7
114
108
97
4,8
2
.
15