1190 Keyboard Assembly; 2010 Lcd Bezel Assembly - Lenovo ThinkPad R14 Gen 2 Hardware Maintenance Manual

When you install the system board:
Ensure that all the connectors are attached firmly to the system board.
Configure the keyboard language in UEFI BIOS:
1. Enter the UEFI BIOS menu.
2. Click Config ➙ Keyboard/Mouse ➙ Keyboard Layout, and then select the keyboard language.

1190 Keyboard assembly

For access, remove these FRUs in order:
• "1010 Base cover assembly" on page 62
• "1020 Built-in battery" on page 65
• "1030 Memory shield and memory module" on page 66
• "1040 M.2 solid-state drive" on page 67
• "1050 Speaker assembly" on page 69
• "1060 Wireless LAN card" on page 69
• "1070 Thermal fan assembly" on page 70
• "1080 I/O card and cable" on page 72
• "1100 Coin-cell battery" on page 75
• "1110 Trackpad cable and trackpad" on page 76
• "1170 LCD unit" on page 80
• "1180 System board" on page 83

2010 LCD bezel assembly

For access, remove this FRU:
• "1190 Keyboard assembly" on page 86
• "1170 LCD unit" on page 80
Removal steps of the LCD bezel assembly
When installing:
Ensure that all the latches are attached firmly.
86
E14 Gen 2/R14 Gen 2/E15 Gen 2 Hardware Maintenance Manual