Xsential x-301 instant hot water dispenser (7 pages)
Summary of Contents for Xsential XSOFT1019
Page 1
Customer and Water Condition Detail Name: Water Hardness: Operation Water Temperature ( > 65 Regeneration Frequency: Salt require per generation: 3kg...
Page 2
If the water is 10 grains hard, then the unit requires regeneration once every 1,200 gallons. So please forward 300ml of your water sample to Xsential for test. Also please supply your contact details (email preferred) with the water sample.
Page 3
cylindrical tank is the brine tank. It is the tank where regular softener salt top up is required from time to time. So please make sure it’s accessible at all times. Step 2 Locate the cold/hot water (maximum water temperature is 65°C) supply and a nearby floor drain.
Page 4
Estimate how much water is used on a daily basis and then set the frequency accordingly. Visit www.xsential.com.au to see more of Xsential’s products to suit various water feed appliances. OLUTION FOR OFFEE ACHINES...