Troubleshooting - Zokop KAF1300P-D1 User Manual

1. Unplug the appliance and let it cool down.
2. Make sure all parts are clean and dry.
3. Push the cord into the cord storage compartment. Fix the cord by inserting it
into the cord fixing slot.
This chapter summarizes the most common problems you could encounter with the
appliance.
Problem
The air fryer does not
work.
The ingredients fried with
the air fryer are not done.
The ingredients are fried
unevenly in the air fryer.
Fried snacks are not crispy
when they come out of the
air fryer

TROUBLESHOOTING

Possible cause
The appliance is not
plugged in.
You have not set the timer.
The amount of the
ingredients in the basket in
too much.
The set temperature is too
low.
The preparation time is too
short.
Certain types of the
ingredients need to be
shaken halfway through
the preparation time.
You used a type of snacks
meant to be prepared in a
traditional deep fryer.
~ 14 ~
Solution
Put the mains plug in an
earthed wall
Set the temperature
to the
required preparation time to
switch on the appliance.
Put smaller batches of
ingredients in the basket.
Smaller batches are fried more
evenly.
Set the temperature
to the
required temperature setting
(see section 'Settings' in
chapter 'Using the appliance').
Set the temperature
to the
required preparation time (see
section 'Settings').
Ingredients that lie on top of or
across each other (e.g. fries)
need to be shaken halfway
through the preparation time.
See section 'Settings' in chapter
'Using the appliance
Use oven snacks or lightly
brush some oil onto the snacks
for a crispier result.