Page 1
UK/Ireland 0333 3201989 Help@guildpowertools.co.uk Important - Please read these instructions fully before operating or maintaining your Guild Lithium-Ion Screwdriver These instructions contain important information that will help you get the best from your Guild Lithium-Ion screwdriver, ensuring it remains safe to operate.
Safety Information Important - Please read these instructions fully before starting assembly Warning Symbols The following warning symbols appear throughout this assembly manual and indicate the appropriate safety measures you should take when assembling and operating the Lithium-Ion Screwdriver. To reduce the risk of injury. Please read the instruction manual Warning Wear ear protection Wear eye protection...
Page 4
Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
Page 5
Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
Page 6
Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. 6) Service Have your power tool serviced by a qualified repair person using only identical replacement parts.
Page 7
Safety Information Important - Please read these instructions fully before starting assembly General Safety Warnings WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe...
Operating Instructions NOTE: Before using the tool, read the instruction book carefully. Intended Use This tool is intended for driving in and loosening screws. BEFORE PUTTING INTO OPERATION 1. CHARGING THE BATTERY(SEE FIG A) NOTE: a) Do not use any charger other than that specifically provided for use with the equipment. b) If the battery pack is very hot you must remove your battery pack from the charger and allow time for the battery to cool down before recharging.
Page 10
Operating Instructions OPERATION 1.FITTING AND REMOVING BITS (SEE FIG B) Insert the bit into the bit holder and push the bit into the chuck as far as possible. To remove the bit, simply pull it out of the bit holder. 2.
Page 11
Operating Instructions 4. ON / OFF SWITCH Depress the On/Off switch to start and release it to stop your screwdriver. 5. ADJUSTABLE HANDLE This tool can use as straight grip or pistol grip. (SEE FIG E, F) Push Adjustable Handle Lock Switch (2) onward, Adjustable the Handle (4) to your favourite position, Adjust Handle Lock Switch will recover itself, and then you can use the tool.
Maintenance Your power tool requires no additional lubrication or maintenance. There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place.
Technical Data Vibration Information The declared vibration total value may be used for comparing one tool with another, and may also be used in a preliminary assessment of exposure. WARNING: The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used dependant on the following examples and other variations on how the tool is used: How the tool is used and the materials being cut or drilled.
Guarantee This product is selected for DOMESTIC USE ONLY and not for business use. This product is guaranteed against manufacturing defects for a period of 24 months. This does not cover the product where the fault is due to misuse, abuse, use in contravention of the instructions, or where the product has been the subject of unauthorised modifications or alterations, or has been the subject of commercial use.