Panasonic VIERA TH-42PV70M Operating Instructions Manual page 21

■
Menu list
Menu Item
AV Colour System
Colour Matrix
Child Lock
Channel Selection
Auto Tuning
Programme Edit
Manual Tuning
Off Timer
Teletext
Teletext
Language
Shipping Condition
Power Save
Side Panel
Input Labels
Banner Display
Timeout
VIERA Link
Power off Link
Power on Link
Refresh Rate
Software Licence
System Information
•
A different menu will be displayed while PC is used.
•
Only available items can be selected.
Adjustments / Confi gurations (alternatives)
Selects optional colour system based on video signals in AV mode
(Auto / PAL / SECAM / NTSC4.43 / NTSC3.58)
Available only with 480p or 576p input signals in a natural colour from digital equipment
connected to AV2 / AV3 Component or HDMI1 / HDMI2 terminals
Select SD or HD to adjust suitable colour parameters for SD (standard defi nition) or HD
(high defi nition)
•
SD: Input signal is a normal TV system
•
HD: Input signal is a High-Defi nition system
Locks a programme channel to prevent access to it (p. 24)
Selects the most easily viewed channel selection method (Position / Direct) (p. 22)
Automatically sets the channels received in the area (p. 23)
Edits channels (p. 23)
Sets the channels manually (p. 22)
Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
Teletext display mode (FASTEXT / List) (p. 16)
Selects teletext language (English / CIS / E.Europe / Persian)
Resets all settings, for example, when moving house (p. 25)
Reduces brightness of picture to economise on power consumption (Off / On)
Increases the brightness of the side panel (Off / Low / Mid / High)
•
The recommended setting is "High" to prevent panel "image retention"
Labels or skips each input terminals (p. 26)
Sets how long the information banner (p. 13) stays on screen
•
0 (No display) to 10 sec. in 1-sec. increments
Sets to use VIERA Link functions (Off / On) (p. 28)
Set to "Set" to use Power off Link function (No / Set) (p. 29)
Set to "Set" to use Power on Link function (No / Set) (p. 29)
Changes the image processing of the panel (depending on the input signal) (50Hz / 100Hz)
•
Set to "100Hz" normally
Displays the software licence information
Displays the system information of this TV
(p. 27)
21