Panasonic VIERA TH-42PV70M Operating Instructions Manual page 20

How to Use Menu Functions
■
Menu list
Menu
VIERA Link Control
Speaker Selection
Menu
Contrast, Brightness,
Colour, Sharpness
Tint
Colour Temperature
CH Colour Set
Colour Management
P-NR
MPEG NR
3D-COMB
Reset to Default
Menu
Bass
Treble
Balance
Headphone Volume
Surround
Volume Correction
HDMI1 Input
Reset to Default
20
Item
Controls the connected Panasonic equipment
"Easy control only with VIERA remote control" (p. 29)
"Speaker control" (p. 29)
•
You can also access VIERA Link Menu directly using the VIERA Link button on the
remote control.
•
Basic picture mode (Dynamic / Standard / Cinema)
Set for each input signal
Adjusts colour, brightness, etc. for each picture mode to suit your taste
•
Adjusts tint of image
For NTSC signal reception only
Chooses the colour balance of the entire image (Cool / Standard / Warm)
Colour density varying between broadcast channels can be adjusted to three levels for
each reception channel
•
Select the channel you want to adjust and set this function
Automatically adjusts colours to vivid ones (Off / On)
•
Not valid on PC signal
Picture Noise Reduction
Automatically reduces unwanted picture noise (Off / Weak / Strong / Auto) •
Not valid on HDMI or PC signal
Automatically reduces noise for watching DTV, DVD and VCD
(Off / Weak / Mid / Strong)
Automatically makes still pictures and slow pictures look more vivid (Off / On)
•
For PAL or NTSC signal reception only
•
Not valid on S-Video, components, PC and HDMI
Press the OK button to reset the present Picture Menu to the default settings
•
Basic sound mode (Music / News / Cinema)
Set for each input signal
Adjusts the output level of deep bass
Adjusts the output level of high-pitch, shrill sound
Adjusts volume level of right and left speakers
Adjusts the volume of the headphones
Surround sound settings (Off / On)
•
Switching is also possible by the Surround button on the remote control (p. 7)
Adjusts volume of individual channel or input mode
Select to fi t the input signal (Auto / Digital / Analogue) (p. 34)
Auto
Digital
Analogue : HDMI-DVI adapter cable connection
•
HDMI input mode only
•
HDMI2 terminal is for digital signal only
•
No setting for HDMI2 available
Press the OK button to reset the present Sound Menu to the default settings
Adjustments / Confi gurations (alternatives)
: Automatic detection of digital or analogue sound source
: HDMI cable connection