Pioneer AVIC-W8500NEX Operation Manual page 140

Menu Item
[Connection Status]
[GPS Antenna]
[Positioning Status]
[Installation]
[Speed Pulse]
[Illumination]
[Back Signal]
[iDataLink]
[OEM Settings]
Menu Item
[OEM Settings]
[OEM Volume Settings]
Menu Item
[OEM Volume Settings]
Description
Check that the leads are properly connected between this
product and vehicle.
Displays the connection status of the GPS antenna ([OK] or
[NOK]) and the reception sensitivity.
NOTE
If reception is poor, change the installation position of the GPS
antenna.
Displays the positioning status (3D positioning, 2D
positioning, or no positioning), the number of satellites
used for positioning (orange), and the number of satellites
that have received signals (yellow). If signals from more
than three satellites are received, the current location can
be measured.
Indicates whether the installation position of this product
is correct or not. If installed correctly, [OK] appears. When
this product is installed at an extreme angle exceeding the
limitation of the installing angle, [NOK(Inst. Angle)] is
displayed. If the installation of this product is continually
changed and it is not firmly fixed into place,
[NOK(Vibration)] is displayed.
The speed pulse value detected by this product is shown.
Displays the status of headlights or small lamps of the
vehicle.
When the shift lever is shifted to "R" (reverse position), the
signal switches to [High] or [Low]. The signal displayed
varies depending on the vehicle.
Displays the status of the optional iDatalink adapter.
Description
(page 130).
Description
(page 130).
- 140 -