Auto Door; Setting The Auto Door - Hitachi R-X670GE Instruction Manual

Auto Door

■ Auto Refrigerator Door
■ Auto Drawer
Open Button for the
Auto Refrigerator
Door
(Automated)
Handle
(manual operation)
Handle
(manual operation)

Setting the Auto Door

You can enable or disable the Auto Door function. The function is enabled when shipped from the
factory.
Touch
1
All indicator lamps turn on, and then the current settings are displayed.
2
Press and hold
three seconds or more
until the preset sound (long
beep) is heard to turn on
the "Auto Door" indicator
lamp.
3
Touch
hold
to turn off the "Auto Door" indicator lamp.
Notice
● When the Auto Door function is turned " off " , open the door with the handle.
● The Auto Door function cannot be disabled for either Auto Refrigerator Door or Auto Drawer only.
12
Refrigerator
Compartment
door (left)
You can open the door easily by touching the door lightly with your fingers thanks to
the Auto Door function.
Auto Drawer function helps you to pull out the case easily even if it is heavy with
plentiful foods in.
Electric
refrigerator unit
Auto Drawer switch
(Automatic)
Handle
(manual operation)
button on the Control Panel to turn on the indicator lamp.
for
on the Control Panel to turn on the indicator lamp, press and
for 3 seconds or more until the preset sound (2 beeps) is heard
Refrigerator
Compartment
door (right)
Lower Freezer
Vegetable Compartment
● When an infant child may use the Auto Door to make mischief,
please stop the Auto Door function.
● Do not operate the Auto Refrigerator Door Switch when
another person is in front of the refrigerator (which may lead to
personal injury unexpectedly by the opening door).
● Do not bring your foot too near the refrigerator when you press
the Auto Drawer switch of the vegetable compartment. (You
may knock your foot against the door and may cause injury)
● Do not put any item on the refrigerator.
● Do not hold any portion of the door other than the handle. (This
can cause pinching of fingers, which could result in injury.)
● Operate the auto door switch with your hand.
● Be sure to unplug the power plug before cleaning the Auto Door.
Touch it
Caution
Light ON
(Factory setting / At the time of setting )