Using The Bridge; Use As A Root Device - LG MUSICflow DSH9 Owner's Manual

38 Connecting

Using the Bridge

Use as a root device (wired to
the home router)
When your home router is located too far from any
speaker location that is to be connected via wired
mode, connect the Bridge (R1) to your home router
2
with LAN cable.
1. Attach the power cord to the power port on the
rear of the Bridge (R1) and then plug the power
cord into an electrical outlet.
2. The power LED on the front of Bridge (R1) turns
on. On your smart device, launch Music Flow
Player app. Select [Connect product] to install the
speaker.
b
a
Bridge (R1)
3. Select the [Bridge] and tap [Next] on the screen.
4. Select [Wired connection] on the screen.
5. Connect one end of the LAN cable to the Bridge' s
ETHERNET port, and connect the other end to
your wireless router.
Wait a moment until
stops blinking and stays white.
Network status LED