Table of Contents
Advertisement
Organizing cables
Organize the cable with cable holder.
1. Attach and fix the cable holder as shown below.
2. Insert cables to the cable holder.
Connecting the AC
Adapter
Connect the speaker to the power supply with the
supplied AC adapter.
1. Connect the supplied AC power cord to the AC
adapter.
2. Connect the AC adapter cable to DC IN adapter
input.
3. Plug the AC power cord into an AC outlet.
>
Caution
Only use the AC adapter supplied with this
device. Do not use a power supply from another
device or manufacturer. Using any other power
cable or power supply may cause damage to the
device and void your warranty.
Wireless subwoofer
connection
LED indicator of wireless subwoofer
LED Color
Status
Green
The connection is trying.
(Blink)
Green
The connection is completed.
Red
The wireless subwoofer is in
standby mode or the connection
is failed.
Off (No
The power cord of wireless
display)
subwoofer is disconnected.
Setting up the wireless subwoofer for
the first time
1. Connect the power cord of the wireless
subwoofer to the outlet.
2. Turn on the main unit : The main unit and wireless
subwoofer will be automatically connected.
Manually pairing wireless subwoofer
When your connection is not completed, you can
see the red LED or the blinking of green LED on the
wireless subwoofer and the subwoofer does not
make sound. To solve the problem, follow the below
steps.
1. Adjust volume level of the main unit to minimum.
- "VOL MIN" appears on the display window.
2. Press and hold
(Mute) on the remote control
for about 3 seconds.
- "SUB-WF RESET" appears on the display
window briefly.
Connecting
13
2
Advertisement
Table of Contents
