Gardenline MFH3300-4P User Manual page 30

Petrol multi garden tool
Hide thumbs Also See for MFH3300-4P:
Table of Contents

Advertisement

MFH3300-4P
m IMPORTANT!
Hint in case of sending the equipment to a service station:
Due to security reasons please see to it that the equipment is sent back free of oil
and petrol!
Fault
Possible cause
Machine does
• Air filter is contaminated.
not start.
• Petrol filter is blocked.
• Lack of petrol supply.
• Fault in the petrol line.
• Starting device is faulty.
• Engine stalled.
• Spark plug cap not at-
• No spark.
• Engine faulty.
• Carburetor faulty
Machine
• Wrong carburetor setting
starts but
stops again.
Engine starts
• Cutting tool blocked.
but the cutting
• Internal fault (drive shaft,
tool stops.
• Clutch faulty.
Machine
• Carburetor set up incorrect-
works with
interruptions
• Spark plug is sooty.
(sputtering).
• On/off switch faulty.
Smoke is
• Wrong petrol mix.
generated.
• Carburetor set up incorrect-
AFTER SALES SUPPORT
1300 855 831
tached.
(idle speed).
gearbox).
ly.
ly.
MODEL: MFH3300-4P PRODUCT CODE: 47629 02/2017
Remedy
• Clean/replace the air filter.
• Clean or renew the petrol filter.
• Re-fuel.
• Check the petrol line for kinks or
damage.
• Contact the service centre.
• Remove the spark plug, clean
and dry it; then pull the starter
rope several times; re-fix the
spark plug.
• Check the correct position of the
spark plug cap.
• Clean the spark plug or replace
it, if applicable.
• Check the ignition cable for
damage.
• Contact the service centre.
• Contact the service centre.
• Turn off engine and remove
object.
• Contact the service centre.
• Contact the service centre.
• Contact the service centre.
• Clean the spark plug or replace
it.
• Contact the service centre.
• Use two-stroke mixture at a ratio
of 40:1.
• Contact the service centre.
 support@scheppach.com.au
AUS
Troubleshooting
35

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

47629

Table of Contents