Page 1
IR-IND Industrial Infrared & IRK-2 Infrared Operating Instructions For tips on using infrared thermometers visit the ThermoWorks Help Center at help.thermoworks.com.
Page 2
12 minutes. Infrared measurements are affected by many factors including emissivity, distance, ambient temperature, material of target being measured and many other factors. For tips on using infrared thermometers visit the ThermoWorks Help Center at help.thermoworks.com.
Page 3
To reset the thermometer, turn it off and remove the batteries for at least one minute. Resinsert the batteries and turn on. If the error message remains, please contact Technical Support at techsupport@thermoworks.com for further assistance. ‘Hi’ or ‘Lo’ is displayed when the temperature being measured is outside of the measurement range.
Page 4
This device has been calibrated by temperature and/or resistance standards that are traceable to NML (National Measurement Laboratory) of Taiwan, and the calibration procedure corresponds with generally accepted regulations and standards. ThermoWorks, Inc. Utah, U.S.A. www.thermoworks.com P-14-008-02-c...