Hisense BabySense V35US User Manual page 7

light source or direct sunlight. Avoid installing the
camera where there are thick walls or obstruc�ons
between the camera and the monitor.
• To use your parent unit and baby unit together, you
must be able to establish a radio link between them;
the range may be affected by environmental
condi�ons/obstacles (See more details in Trouble-
shoo�ng Sec�on on page 11 - "Interference or poor
recep�on")
4 Opera�ng the Monitor
4.1 Pairing the Baby Unit (Camera) with
the Parent Unit
To pair a new/addi�onal Baby Unit, follow the
procedure below:
NOTE: Before you begin pairing, be sure to have the
Baby and Parent Units side by side and turned on.
• Press the MENU/OK bu�on on your Parent Unit
and the menu screen will pop up.
• Press the LEFT bu�on or RIGHT bu�on un�l
the PAIR icon is highlighted in red.
• Then press the MENU/OK bu�on and a
secondary menu with camera op�ons will pop up.
• Press the LEFT bu�on or RIGHT bu�on to
select the desired Baby Unit to pair and press the
MENU/OK bu�on bu�on to start searching for a
Baby Unit to pair.
• The chosen Baby Unit will start blinking. Press and
hold the PAIR bu�on (10) in the back of Baby Unit
un�l the connec�on is established.
• Once paired, an image from the paired Baby Unit will
display on the screen.
• Press the EXIT bu�on to exit the menu.
• If unsuccessful, please repeat above steps.
7