Download Print this page
iLive ISBW246 User Manual
iLive ISBW246 User Manual

iLive ISBW246 User Manual

Wireless water resistant speaker

Advertisement

Quick Links

Wireless Water Resistant Speaker
User's Guide for Model ISBW246
FCC Warnings
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Features
• IPX4 water resistant
• Built-in speaker
• Supports Bluetooth
• Wireless range: 60 feet
• Built-in microphone for speakerphone
LED Light ON/OFF
Press 1 - ON
Press 2 - Dim
Press 3 - Flashing
Press 4 - OFF
LED Light
Overview
• LED flashlight
• Micro-SD memory card reader
• Aux in (3.5mm audio input)
• DC battery power: built-in 2200mAH
rechargeable lithium ion battery
• Battery life: approx. 7 hours at 50% volume
Micro-USB Charging Port
Power Switch
Press and hold to begin pairing
OFF/ON
DC IN
AUX
Pairing Indicator
Aux In
Attach Handstrap
additional Warnings and PreCautions
• To avoid hearing damage, make sure that the volume on your music player is turned down before
connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume
until you reach a comfortable listening level.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed
of according to state and local guidelines. They should never be disposed of in normal household
waste, and they should never be incinerated, as they might explode. Contact your local government for
disposal or recycling practices in your area.
• WARNING: This product may contain chemicals known to the State of California to cause birth defects,
or other reproductive harm (California Prop 65). Wash hands after handling.
• This product meets and complies with all Federal regulations.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Includes
• Micro-USB to USB charging cable
• Handlebar bracket
• Wrist strap
• User's Guide
Play/Pause/Speakerphone
Press to play or pause an audio track.
Press to answer an incoming call.
Pair Bluetooth
Press and hold to switch between
Bluetooth, SD and FM Radio modes.
to a Bluetooth device.
PAIR
MICRO SD
Micro SD
Microphone
Card Port
Rubber Control Cover
Attach to Bicycle Handlebar
Skip/Volume +/-
Press to skip audio tracks.
Press and hold to adjust volume.
Speaker

Advertisement

loading

Summary of Contents for iLive ISBW246

  • Page 1 Wireless Water Resistant Speaker User’s Guide for Model ISBW246 FCC Warnings additional Warnings and PreCautions Warning: Changes or modifications to this unit not expressly approved by the party responsible for • To avoid hearing damage, make sure that the volume on your music player is turned down before compliance could void the user’s authority to operate the equipment.
  • Page 2 1. Power on the unit by sliding the POWER Switch to the ON position, then press and hold the Pair button to begin pairing. The pairing indicator will 1. Insert a Micro-SD card in the card slot. The speaker will begin playing begin quickly flashing blue. When pairing, remain within 3 feet of the unit. automatically. 2. Using the controls on your Bluetooth device, scan for and select ISBW246 in 2. Use the controls on the unit to play, pause, and adjust volume. your Bluetooth settings to pair. If your device requests a password, enter the 3. Press and hold the Play/Pause button to switch to a different mode. Refer to the user’s manual for your specific device default password 0 0 0 0 .