Epson P-1000 Quick Reference Manual page 9

Insert the memory card until it clicks
into place. If you are using a
CompactFlash adapter, put the card
into the adapter and insert the adapter
into the slot.
Note:
The eject button may not pop out when
you insert the card.
Caution:
Avoid using or storing the card in direct
sunlight, or in places that are extremely hot, humid, or dusty.
When you are ready to remove a memory card, make sure the
light is off. Then push the eject button and pull out
ACCESS
the card. If the button is not sticking out, press it once to pop it out,
and then press it again to eject the card.
Caution:
Never remove a memory card while the ACCESS light is on; this can
damage or erase data on the card or HDD (Hard Disk Drive).
Note:
If you are using a memory card in a CompactFlash adapter, remove
the CompactFlash adapter from the P-1000; do not remove only the
memory card.
7
Make sure the
card is face up