Advertisement
a signal range check to ensure a good link exists between the transmitter and receiver. Once fl ight is complete, immediately
disconnect the power from the aircraft before removing power from the transmitter.
Always perform a signal range check to ensure a good link exists between the transmitter and receiver at distance. Refer to the
instruction manual with the mating transmitter to determine the best method.
FCC STATEMENT
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions.
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
CE COMPLIANCE INFORMATION FOR THE EUROPEAN UNION
Instructions for Disposal of Waste Equipment by Private Users in the European Union:
This symbol on the product or its packaging indicates this product must not be disposed of with other household waste.
Instead, it is the user's responsibility to dispose of their waste equipment by handing it over to a designated collection
point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner
that protects human health and the environment. For more information about where you can drop off your waste equipment for
recycling, please contact your local city offi ce, your household waste disposal service or location where you purchased the product.
Declaration of Conformity:
Product:
Item number:
The object of the declaration described here is in conformity with the requirements of the specifi cations listed below, following the
provisions of the European 2006/95/EC Low Voltage Directive:
EN 60950-1:2006+A11:2009
The object of the declaration described here is in conformity with the requirements of the specifi cations listed below, following the
provisions of the European R&TTE Directive 1995/5/EC:
EN 300 328 V1.8.1 (2012-06)
EN 301 489-1 V1.8.1 (2008-04)
EN 301 489-17 V2.1.1 (2009-05)
SPECIFICATIONS
Receiving frequencies:
Modulation:
Input power requirement:
1-YEAR WARRANTY
Tactic warrants this product to be free from defects in materials and workmanship for a period of one (1) year from the date
of purchase.
For service on your Tactic product if purchased in the U.S.A.
or Canada, send it postpaid and insured to:
HOBBY SERVICES
3002 N. Apollo Dr., Suite 1
Champaign, IL 61822
Tel: (217) 398-0007 (9:00am - 5:00pm CST, M-F)
E-mail: hobbyservices@hobbico.com
● This product is suitable only for people of 14 years and older. This is not a toy!
● WARNING: CHOKING HAZARD - May contain small parts. Keep away from children
under 3 years. Please retain packaging for future reference.
● No part of this manual may be reproduced in any form without prior permission.
● The contents of this manual are subject to change without prior notice.
● Tactic is not responsible for the use of this product.
Distributed in the EU by Revell GmbH, Bünde Germany
Tactic TR624 2.4GHz Receiver
TACL0624
Safety
Technical requirements for radio equipment
General EMC requirements for radio equipment
2.403 – 2.480GHz
Compatibility:
SLT 2.4GHz FHSS
Range:
4.0 – 6.0 volts
FailSafe:
Tactic 2.4GHz or SLT 2.4GHz transmitters
full range
throttle position user selectable, other channels hold
If purchased in the European Union, send it postpaid and
insured to:
Service Abteilung Revell GmbH
Henschelstrasse 20-30
32257 Bünde Germany
Tel: 01805 110111 (nur für Deutschland)
Email: Hobbico-Service@Revell.de
© 2014 Hobbico, Inc
All rights reserved
TACL0624 v2
Made in China
Advertisement
