HANMEY AM60 Operate & Parts Manual page 11

AXLE BRACKET/CATCH ASSEMBLY - FITTING BY DEALER
Bolt axle plates to the tractor axle at either 1.0 M or 1.1 M apart - this may necessitate the
to removal of the tractor's check chains and/or assister ram brackets, if this is the case, the
axle plate will include replacement brackets for these functions.
The axle brackets supplied will be accompanied by a fitting sheet with instruction for their
attachment to your tractor, follow the instructions exactly as they are specific to your
particular make and model of tractor. Replace assister ram(s) if fitted.
Hook the catch assemblies onto the rear
of the axle plates, push firmly against
the plate and vigorously pivot the catch
in a forward and up direction until the
spring loaded hook 'snaps' into position.
Pass the release cords up into the cab.
NOTE:
On some tractors fitted with auxiliary fuel tanks,
there is insufficient space for the spring
catches to be fitted, in these instances special
axle brackets and catches with a
'pin on' facility are available on request.
Ensure catch-locking pin 'A' is removed.
11