Using The Microphone; Troubleshooting Guide; No Power; No Lightshow Effect - RockJam RJPS150 User Manual

Bluetooth karaoke party speaker
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Using the Microphone

You can sing along to any music playing from the karaoke speaker using the microphones
included. Plug the microphone/s into the MIC1/ MIC2 socket/s on the top of the speaker. Adjust
the microphone volume and echo control as desired. If any howling sound occurs, then stand
further away from the speaker or reduce the music or microphone volume until the howling
stops.
NOTE: Do not tap or bang the microphone as this can cause damage to both the microphone
and speaker. Be careful not to twist or strain the microphone cable and do not swing the
microphone by the cable as this will cause irreparable damage.

Troubleshooting Guide

If you encounter any issues while using the karaoke speaker then please check the following
before contacting the retailer or manufacturer for further help:

No power

• The power is not on; make sure the party speaker POWER/ VOLUME control is not turned
fully to the left.
• The karaoke speaker could be completely out of charge. Recharge the speaker using a USB
power supply and then try again.

No lightshow effect

• The Lightshow is probably just switched off. Press and hold the ECHO/ LIGHTS button to turn
on the lights.
No sound – Bluetooth mode
• Make sure that you are not trying to use Bluetooth while the AUX in cable is connected.
• The main volume could be set to minimum; raise the volume.
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents