Installation; Storage And Transport; Troubleshooting - baliv BM-6640 Instruction Manual

GB
"Important, keep for reference at a
later date: read carefully"
• The user of this product must have read and
understood these operating instructions prior to
its first use in order to safely implement this prod-
uct.
• Please comply with all safety instructions! If you
disregard any of the safety instructions you may
place yourself and others at risk.
• Store all operating information and safety instruc-
tions for future reference.
• If you sell or pass on the product, you must also
pass on these operating instructions.
• All parts of the products must be assembled cor-
rectly.
• Two people are required for assembly.
• When working on walls, ceiling or floors, pay
attention to any installed cables as well as gas
and water lines.
• Wall mounting should be carried out by a qualified
person, due to the fact that wrong wall mounting
can lead to that the furniture/object topples or falls
resulting in personal injury or damage.
• Choose screws and fittings that are specially
suited to the material in your wall/ceiling and have
sufficient holding power.
• This product may not be used outdoors.
• Installation may be carried out only by a suitably
qualified electrical specialist.
• Use only connection clips authorised by the man-
ufacturer.
• Only use connection cables permitted by the
manufacturer.
• The light source of this luminaire is not replacea-
ble; when the light source reaches its end of life
the whole luminaire shall be replaced.
Risk of damage to the eyes! Never look di-
rectly into the LED.

Installation

► Scope of delivery – p. 2
► Assembly – p. 3
DANGER! Risk of fatal injury due to elec-
tric shock! Installation may be carried out
only by a suitably qualified electrical special-
ist.
Before installation, it must be ensured that
there is no current to the electrical network
(switch off at main switch or remove fuse).
Safety distances
► P. 3, item 1
DANGER! Danger of electric shock! The
product is suitable for operation in Zone 3.
Fault/malfunction
The lamp does not light up
16
Mirror cabinet
– Connect the mains cable (► P. 7, item 10).
• The luster terminals are not included in the deliv-
• Screws and wall plugs are not included in the
• Please only use products that are suitable for the
Cleaning
– Wipe down the device with a dry or damp cloth.

Storage and transport

Storing
– Store the device and any accessories in a dry,
– In case of longer periods without operation, pro-
Transport
– Use the original packaging to ship whenever pos-

Troubleshooting

If something stops working...
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
Cause
No mains voltage?
Light source defective?
Luminaire switched on via switch?
DANGER! Danger of electric shock!
Before drilling the holds, make sure that
there are no electrical or other lines in the
wall.
ery.
delivery.
condition of the respective wall.
NOTICE! Risk of damage to the device!
Do not use any sharp or abrasive objects, or
aggressive cleaning agents.
Do not use cleaning solutions.
well-ventilated place.
tect the device and its accessories against soiling
and corrosion.
sible.
DANGER! Danger to life and limb!
Improper repairs can result in the product
functioning unsafely. This endangers your-
self and your environment.
DANGER! Risk of fatal injury due to elec-
tric shock! All work to eliminate possible
faults should be carried out with the fuse
switched off. All work should be carried out
by a qualified electrician.
Remedy
Check fuse. Contact a specialist.
Check illuminant, replace if neces-
sary if possible
Check switch position