Table of Contents
Advertisement
How to Use (cont.)
ROASTING
1. Press ROAST.
2. Press numbers to set the temperature (1=180° F, 2=225° F, 3=250° F, 4=275° F,
5=300° F, 6=325° F, 7=335° F, 8=350° F, 9=375° F and 0= 400° F).
3. Press START.
4. Press numbers to enter the cooking time. The longest time is 99 minutes and
99 seconds.
5. Place the food in the oven on top of the bake pan. Press START.
6. To use ROAST presets, press ROAST pad twice, then press ROAST 1–5 times to
select a food code (see table below).
7. Press START.
8. Press ROAST repeatedly to set the food weight (see table below).
9. Place the food in the oven on top of the bake pan and press START.
10. Press STOP/CANCEL to cancel cooking.
ROAST Preset
Food
Ar-1
Salmon Filet
Ar-2
Whole Chicken
Ar-3
Pork Loin
Ar-4
Pork Tenderloin
Ar-5
Roasted Potatoes
12
21
Weight
Minutes
4 oz.
25
8 oz.
28
12 oz.
31
16 oz.
34
20 oz.
37
4 lbs.
60
2 lbs.
35
3 lbs.
45
1 lb.
25
2 lbs.
35
4 oz.
32
6 oz.
34
8 oz.
36
10 oz.
38
12 oz.
40
16 oz.
42
wards.com
How to Use (cont.)
CHILD LOCK
1. To prevent unsupervised operation of the oven, set the child lock by pressing
and holding STOP/CANCEL for 5 seconds. A beep will sound and a LOCK
indicator will show in the display window.
2. To cancel, press and hold STOP/CANCEL for 5 seconds until lock indicator on
display turns off.
ERROR CODES
1. EO3: When the system enters into super high temperature protection status,
the display shows "E03" and continues to beep. Press STOP/CANCEL and the
system will come back to normal standby mode.
2. EO4: When the system enters into super low temperature protection status, the
display shows "E04" and continues to beep. Press STOP/CANCEL and the
system will come back to normal standby mode.
3. EO5 or EO6: When the system sensor is open circuited or short circuited, the
display shows "E05" or "E06" and the buzzer makes an alarm sound. Press
STOP/CANCEL and the system will come back to normal standby mode.
4. FAIL: If any pad on the control panel is depressed for 60 seconds, the program
stops, the display shows "FAIL" and the system will beep every minute. Press
STOP/CANCEL and the system will come back to normal standby mode.
1
888
•
557
3848
•
•
13
Advertisement
Table of Contents
