SAFETY INSTRUCTION Warning : In order to avoid overheating, do not cover the heater. 2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
Page 5
CAUTION — Some parts of this product can become very hot and cause burns. Particular atten- tion has to be given where children and vulnerable people are present. 8. This heater is filled with a precise quantity of special oil. Repairs requiring opening of oil-container are only to be made by the manu- facturer or his service agent who should be contacted if there is an oil leak.
Page 6
WARNING: IN ORDER TO AVOID OVERHEATING, DO NOT COVER THE HEATER. PART FIGURE Air Outlet Power Indicator Light Radiating unit Termostat Knob Power Switch Knob Cord wrap Caster assembly ASSEMBLY INSTRUCTIONS [Installation of the caster assembly] 1.Place the heater body inversely with the bottom upward.
Page 7
WARNING: Risk of fire. Do not operate heater without wheel assemblies attached. Operate heater in upright position only (wheels on bottom, controls on top). Any other position could create a hazardous situation. Ensure that the surface beneath the heater is clean and free of any obstructions.
Page 8
3. Do not scrap the surfaces of flanges with sharp hard tools, to avoid surfaces getting rusty, because of damage of the paint coat. MAIN TECHNOLOGY SPECIFICATIONS Power supply: AC220-240V ~ 50Hz POWER REGULATION RANGE (W) MODEL ORC13F2500R 1000 1500 2500...
Need help?
Do you have a question about the ORC13F2500R and is the answer not in the manual?
Questions and answers