Picture - Magnavox 32ME306V Owner's Manual

Picture

Before you begin:
You must set Home in Location. L p. 30
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into standby mode.
1
Press MENU and use H I to select Picture, then press OK.
Picture Auto picture
Sound Backlight
Setup Contrast
Features Brightness
Language Color
USB Tint
Sharpness
Advanced settings
2
Use H I J K to select the item you want to adjust, then press
OK.
To select the desired setting, then press
OK. (Personal, Standard, Vivid, Sports,
Movie, Game or Eco)
Auto picture
When you adjust the following settings,
Personal picture will be set automatically
when Location is set to Home.
J Cursor
To reduce power
consumption and
Backlight
reduce backlight
brightness
Contrast
To decrease contrast To increase contrast
To decrease
Brightness
brightness
To decrease color
Color
intensity
Tint
To add red
Sharpness
To soften
To select the desired setting, then press
OK.
(Color alignment, Noise reduction, Black
Advanced settings
stretch, Dynamic contrast, Gamma and Film
mode)
Personal
18
50
30
30
0
2
Cursor K
To increase power
consumption and
brightness
To increase
brightness
To increase color
intensity
To add green
To sharpen
You can set a particular picture quality using Advanced
●
settings.
Color alignment
Picture
Sound Noise reduction
Setup
Black stretch
Features
Dynamic contrast
Language
Gamma
USB
Film mode
To set the picture color temperature
to Personal (Cool, Normal or Warm)
Color
When you adjust the following
temperature
settings, Personal picture will be
mode
set automatically when Location is
set to Home.
To decrease red
Red gain
contrast
Color
Green gain To decrease
alignment
green contrast
To decrease blue
Blue gain
contrast
Red offset To decrease red
brightness
Green
To decrease
offset
green brightness
Blue offset To decrease blue
brightness
To select the desired setting, then press OK
Noise
reduction
(Off, Minimum, Medium or Maximum)
Off
To set Black stretch to Off
Black stretch
On
To enhance black color
Off
To set Dynamic contrast to Off
Dynamic
To enhance contrast in an image
contrast
On
automatically
Gamma1
To change the gamma setting
Gamma Gamma2
(changes the brightness and
contrast in the picture)
Gamma3
Off To set Film mode to Off
Film mode
To optimize the picture recorded by
Auto
the original film
21
Normal
Medium
On
On
Gamma2
Auto
J Cursor Cursor K
To increase red
contrast
To increase
green contrast
To increase blue
contrast
To increase red
brightness
To increase
green brightness
To increase blue
brightness
Continued on next page.
.
English